|
01-08-2017, 06:28 PM | #1 |
Junior Member
Join Date: Jan 2017
Location: canada
Posts: 7
|
New to Forum shawnie
Hello from canada got my bike last summer is my first ride been customizing ever since used this as a resource and decided i would try it out Hey wanna see my bike 2001 32000km
!1st pic stock @2 and third forth customized going to add audio system hard bags sissy bar gunna try a aftermarket exhaust did uni filter mod and re jetted carb and new shinkos for her feet Login or Register to Remove Ads Last edited by shawnie; 01-08-2017 at 06:35 PM. |
|
01-08-2017, 07:46 PM | #2 |
Senior Member
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
|
Welcome to the family....Make her your own!!!!
|
|
01-08-2017, 08:17 PM | #4 |
Junior Member
Join Date: Jan 2017
Location: canada
Posts: 7
|
located in ontario lots of twisties a nice place to ride but season is over so time for upgrades!
|
|
01-08-2017, 11:13 PM | #5 |
Senior Member
Join Date: May 2015
Location: Henderson, NV
Posts: 1,108
|
Welcome to the group Shawnie! Looks like you have gotten a good start on your mods. Interesting picture on the fuel tank. Is that decal or someone's artwork? Also like the iron cross on the rear fender. I just took the second rider seat off of my "09" and like the cleaner look. Have been toying with the idea of a minimal fender chop, but it is hard getting away from the classic look. Good luck with your project. Send more pics as your project moves forward, and as always, safe riding.
Login or Register to Remove Ads |
|
01-09-2017, 05:35 AM | #6 |
Senior Member
Join Date: Nov 2008
Location: Tenerife (Spain)
Posts: 3,719
|
Looks like the big 3D MARAUDER logo on the tank. It's only in America that it's called the GZ. European/Canadian bikes are called MARAUDER.
b3.jpg
__________________
By birth an Englishman, by the grace of God a Yorkshireman. |
|
01-09-2017, 09:10 AM | #7 |
Junior Member
Join Date: Jan 2017
Location: canada
Posts: 7
|
yeh those are the 3d logos this winter im going to remove them and go with a pin up somthing like this one the decal on the tank is a tank protector that i clear coated right into the paint soo many cans of 2k clear but she looks like a bowling ball painting her myself was the most rewarding experience i used toyota purple metallic flake and lots of clear 2k and lacquer all went on well no bubbling and such tank was the easy part the plastic front and back fender required much more time had to find the right primer then all was well
Last edited by shawnie; 01-09-2017 at 09:24 AM. |
|
01-09-2017, 09:27 AM | #8 |
Junior Member
Join Date: Jan 2017
Location: canada
Posts: 7
|
After i put her back together
|
|
01-09-2017, 02:41 PM | #9 |
Senior Member
Join Date: May 2015
Location: Henderson, NV
Posts: 1,108
|
Great pics. Thanks for sharing!
|
|
|
|