single seater

[happyhobo]

The 250 is now a single seater. I removed the pillion seat and mounted a Kappa 29L hard case. I used a piece of 1/8 flat steel( 12x7 inches). The rear 1 inch is bent down at 20 degrees to almost match the fender curve. Should have been about 15 degrees to match up better but is a nice fit regardless. Painted the plate a flat black and mounted the Kappa mounting plate to it. I also drilled 2 sets of holes to allow for back and forth movement as required for proper fit for rider comfort. The case is the typical flat black finish and will be getting some black 3M reflective tape on the sides and across the back. This stuff is very bright after dark when lights hit it. Oh, almost forgot, I used the bracket from the pillion seat to secure the front of the mounting plate and it works well and is solid.