My clutch job.

spldart · 11-13-2016, 03:01 PM

A photo essay on doin teh clutch

Hold up 4 teh pics

spldart · 11-13-2016, 03:03 PM

spldart · 11-13-2016, 03:06 PM

spldart · 11-13-2016, 03:09 PM

spldart · 11-13-2016, 03:11 PM

spldart · 11-13-2016, 03:13 PM

spldart · 11-13-2016, 03:16 PM

Don't forget... Gotta re-attach the exhaust rear hanger and the brake pedal

spldart · 11-13-2016, 08:42 PM

oh!
The basket bolts were seated but barely tight.
There was no loctite on them.
They went back in with loctite blue, Thank you for the recommend, and are torqued down properly.
Only did a quick 3 miles test ride today. Everything was awesome.
Will do 50 miles tomorrow.
Went back together with old gasket. No leaking so far.
Will order new cover gasket soon.

burkbuilds · 11-13-2016, 09:09 PM

Nice work on the clutch and the documentation.

Water Warrior 2 · 11-14-2016, 06:04 PM

Good pics. Thanks for sharing.

Although I never plan to open up cases or an engine on a bike I am amazed by the actual designs and the expertise it takes to put it altogether for my riding pleasure.

And a special thanks to all the members here who have amazed me with there projects over the years.

11-13-2016, 03:16 PM	#7
spldart Senior Member Join Date: May 2015 Location: Stafford, Texas Posts: 604	Don't forget... Gotta re-attach the exhaust rear hanger and the brake pedal
	0

11-13-2016, 08:42 PM	#8
spldart Senior Member Join Date: May 2015 Location: Stafford, Texas Posts: 604	oh! The basket bolts were seated but barely tight. There was no loctite on them. They went back in with loctite blue, Thank you for the recommend, and are torqued down properly. Only did a quick 3 miles test ride today. Everything was awesome. Will do 50 miles tomorrow. Went back together with old gasket. No leaking so far. Will order new cover gasket soon.
	0

11-13-2016, 09:09 PM	#9
burkbuilds Senior Member Join Date: Mar 2009 Location: Shannon, Georgia Posts: 1,268	Nice work on the clutch and the documentation.
	0

11-14-2016, 06:04 PM	#10
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Good pics. Thanks for sharing. Although I never plan to open up cases or an engine on a bike I am amazed by the actual designs and the expertise it takes to put it altogether for my riding pleasure. And a special thanks to all the members here who have amazed me with there projects over the years.
	0