|
![]() |
#1 |
Junior Member
Join Date: Jan 2014
Location: Dunedin (New Zealand )
Posts: 26
|
Bike cuts out coming up to stop signs
Hi I found sometimes wen the bike hasn't Bn ridin for a few hours and I've got back on it starts up sweet then start riding nek Minit I'm coming up to lights or stop signs and she will cut off wen I'm stil trying to change down so then I clutch and start her up again and off she goes . The idol sound strong wen I'm starting the bike .but sometimes wen I ride it just cuts out sometimes I give her a couple of revs to keep her alive and it does work but does any one else find that with there bike she didn't do it wen she's hot and been riding for a hour or longer ......hhhhhmmmmm!:confused:
Login or Register to Remove Ads |
![]() |
![]() |
![]() |
#2 |
Junior Member
Join Date: Jan 2014
Location: Dunedin (New Zealand )
Posts: 26
|
Yeah another thing which iz best position for fuel switch wen not riding Fuel . Pri. Or reserve thanks
|
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Nov 2013
Location: Vancouver BC
Posts: 157
|
Qasual ; When the bike is fully warm, adjust the idle on the right side of the bike behind the cylinder head (There should be a little turn knob that is very visible) . Why I recommend this is because the idle may be set to low when the bike is starting but it is running strong because of the use of a choke and after slightly warming up you possibly started riding until it is fully warm. So when it is warm you pop her in neutral and the GZ starts to cut out, in the fully warm state adjust the idle and you should be good to go.
The second question; You should have it in the fuel position, also get familiar with where the knob is and where the other positions are. When you are losing power or cutting out due to low fuel you will have to reach down and switch it to reserve. Prime is only used when the bike (Or I would say Carburetor) is out of fuel OR the bike has been stored for a lengthy amount of time and switched back to 'FUEL' before start up unless necessary you can keep it on prime. Login or Register to Remove Ads |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Nov 2008
Location: Tenerife (Spain)
Posts: 3,719
|
When adjusting the big white knob (idle speed) adjust it to 1200 - 1400 RPM (Suzuki recommendation) with the engine HOT. And add some carb cleaner to the fuel tank.
__________________
By birth an Englishman, by the grace of God a Yorkshireman. |
![]() |
![]() |
![]() |
#6 |
Junior Member
Join Date: Jan 2014
Location: Dunedin (New Zealand )
Posts: 26
|
Hi yeah one thing I noticed this morning iz that my bike started with stand down yesterday it needed to be up before it started iz this a bad thing?
|
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
|
I agree with what Qasual and Alantf said. Probably not a real problem with a little adjustment and TLC. Most newer riders aren't used to hearing a single cylinder idling at a proper speed and think it is too fast. Remember you have one little piston that only fires every 4th stroke and needs to keep the mass of moving parts to not loose their momentum.
I noticed with the bikes we had that the idle would affect the first shift into gear. Too slow of an idle and the tranny parts are not spinning fast enough to "Snick" into gear smoothly. The GZ has a smooth tranny for a budget/price point bike. Have you ever heard a H-D crash into gear? Sure, we all have at some point. It is designed that way and part of the H-D mystique. 90% of all Japanese bikes are smooth as glass. One exception is the Honda Rebel 250 with it's pain in the butt 1st gear. Honda has never fixed it from what I have read and Lynda hated the Rebel she had during her training. She really appreciated her GZ after the Rebel. |
![]() |
![]() |
![]() |
#8 | |
Junior Member
Join Date: Jan 2014
Location: Dunedin (New Zealand )
Posts: 26
|
Quote:
|
|
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: Apr 2012
Location: Elkhart, Indiana
Posts: 369
|
It start with the stand down with the transmission in neutro
|
![]() |
![]() |
![]() |
#10 |
Junior Member
Join Date: Jan 2014
Location: Dunedin (New Zealand )
Posts: 26
|
|
![]() |
![]() |
![]() |
|
|