Experimental Sight glass 14mm

[se]

I am experimenting with some sight glass and I think I got the right dimensions. So far the opening is about 14mm and I tried to see which sight glasses will work and not.

I will post some pictures 2morrow so people can critique and get feedback. I installed it in my gz250 and so far there is no leaks for the past 2 months.

I got 2 extra ones, so if you really, really, and I mean REALLY need a sight glass, and you don't have a working front brake, then just pm me with your address and I will sent one for free. just post your thoughts and tell me if it leaks oil or not.

This is experimental, so i assume no responsibilities. Its just a sight glass, 2 o-rings, and a thin nut.

sorry, i only got 2 and its for the people who want to try it out.

http://i1377.photobucket.com/albums/...psefbv97k4.jpg

[Water Warrior 2]

Looks good.

[se]

here is what you will likely receive.

pIC




this pict is missing another o-ring, you will need 2 o-rings cuss the depth of the opening is a tad too big. I can't the other oring ,but I hope I have an extra lying around.

[motorandy]

Did you purchase this sight glass off of eBay?

I recently bought 2 from eBay but they don't have a nut to tighten them down. They only come with o-rings which I assumed will fit into some groove in the housing itself. Your post has prompted me to try and insert them today.

Thanks!

[se]

I purchase the this on AliExpress (china's amazon) and it was LOT 5 M27x1.5mm sight oil. You can buy this at ebay, but you spend like $1 more.

I recommend that you buy 2 o-rings, cuss the 1 o-ring is like 1mm too thin. It was leaking oil, so i added another o-ring to solve the problem. Now after like 4 months, it does not leak oil.