AC OR DC CDI on a 2000 GZ250?

Deckerator · 09-22-2020, 03:33 PM

Does anyone know? There are a green/blue assuming this is the pulser/trigger,
then just 3 yellow for the rectifier... wouldn't there be 2 more wires if it were an AC unit? I'm assuming the cdi gets its power from the battery rather than coming from the stator?

Thanks....Newbie here.....

Vegas Street Rider · 09-23-2020, 01:21 AM

I would assume so since it is a 12 volt DC system.

5th_bike · 09-23-2020, 07:52 PM

Yes, AFAIK the battery powers the ignition, coil is under the tank. Not a coil & breaker switch in the flywheel.

ebasista · 12-24-2020, 07:15 PM

Sorry for a 3 month late response. But yes, those 3 wires are AC from the stator going to the rectifier to provide DC to the battery. Those 2 extra wires are what contains the small pulse to the CDI telling it RPM/position and when to fire. Attached is the ignitor I ended up using for my gz250.

Deckerator · 12-25-2020, 04:54 PM

Thank Ya! I ended up grabbing a used one for right at 100.00
glad to know that one works for the 250

raddad70 · 12-31-2020, 10:57 PM

I would really like to know what web site you purchased this ignitor and a basic wire diagram. My bike was missing both the ignition coil and CDI. I would like to save over a hundred bucks on a used unit. Your bike seems to run fine? I would be very grateful on how you made it work. Thanks

09-22-2020, 03:33 PM	#1
Deckerator Junior Member Join Date: Jul 2020 Location: Nashville Posts: 7	AC OR DC CDI on a 2000 GZ250? Does anyone know? There are a green/blue assuming this is the pulser/trigger, then just 3 yellow for the rectifier... wouldn't there be 2 more wires if it were an AC unit? I'm assuming the cdi gets its power from the battery rather than coming from the stator? Thanks....Newbie here..... Login or Register to Remove Ads Last edited by Deckerator; 09-22-2020 at 04:08 PM.
	0

09-23-2020, 07:52 PM	#3
5th_bike Senior Member Join Date: Oct 2007 Location: HoCo, Maryland Posts: 1,349	Yes, AFAIK the battery powers the ignition, coil is under the tank. Not a coil & breaker switch in the flywheel. __________________ 2005 "Saturn Black", stock + tach Login or Register to Remove Ads
	0

12-25-2020, 04:54 PM	#5
Deckerator Junior Member Join Date: Jul 2020 Location: Nashville Posts: 7	Thank Ya! I ended up grabbing a used one for right at 100.00 glad to know that one works for the 250 Login or Register to Remove Ads
	0

09-23-2020, 01:21 AM	#2
Vegas Street Rider Senior Member Join Date: May 2015 Location: Henderson, NV Posts: 1,107	I would assume so since it is a 12 volt DC system.
	0

12-31-2020, 10:57 PM	#6
raddad70 Junior Member Join Date: May 2020 Posts: 23	I would really like to know what web site you purchased this ignitor and a basic wire diagram. My bike was missing both the ignition coil and CDI. I would like to save over a hundred bucks on a used unit. Your bike seems to run fine? I would be very grateful on how you made it work. Thanks
	0