|
05-12-2017, 08:13 PM | #1 |
Member
Join Date: May 2017
Location: San Francisco/Bay Area
Posts: 31
|
Gas tank ideas
ok sumone want to tell me why the gz250 tank isnt sealed ?? i leaned the bike a bit too much when transporting it home after filling her up with too much gasoline and it spilled all over the place, good thing i noticed it early . but seriously why is there no rubber seal or something ?? is it because it would build up pressure ???
anyone found a solution to this ??? im going to build small makeshift gasket seals for it , or should i not . also please excuse my inexperience, i am young and this is my first motorcycle Login or Register to Remove Ads |
|
05-12-2017, 08:58 PM | #2 |
Senior Member
Join Date: May 2015
Location: Henderson, NV
Posts: 1,108
|
The gas cap does not seal the tank because it has a vent built into it to relieve the pressure in the tank on hot days.
|
|
05-12-2017, 09:10 PM | #3 |
Senior Member
Join Date: May 2015
Location: Stafford, Texas
Posts: 604
|
If you make a seal for the fill cap you WILL force fuel into the carb on hot days and flood the bike. You will have a bad day.
Don't fill the tank past the lip that shapes downward inside the tank while the bike is on it's kickstand. Login or Register to Remove Ads |
|
05-22-2017, 04:04 PM | #4 |
Member
Join Date: May 2017
Location: San Francisco/Bay Area
Posts: 31
|
lol yeah i figured such after a while, just made a small gasket so that it sits better , but not sealed. As for not filling it up past a certain point ive often over filled it by accident or carelessness . I havnt done that in a while though
|
|
|
|