|
08-28-2021, 03:26 AM | #1 |
Junior Member
Join Date: Aug 2021
Posts: 2
|
Help taking apart the bike
Hi guys I just made the account I have a 2000 and I had a bolt come loose in the engine . I already removed all the metal shreds in the engine but I think I managed to screw up the crankshaft trying to use a flywheel/magneto rotor puller before I removed the 22mm bolt used to turn the crankshaft. I started dremeling off the nut because I couldn
Login or Register to Remove Ads |
|
08-30-2021, 04:43 PM | #3 |
Junior Member
Join Date: Aug 2021
Posts: 2
|
How do I post a picture. If by spline you mean the teeth on the starter clutch gear behind the rotor the teeth are just fine. I think trying to pull the rotor with the nut on pulled it in a way such that the bearings that allow the rotor to be spun by it are not in position to turn the rotor. However there
Login or Register to Remove Ads |
|
08-30-2021, 09:54 PM | #4 |
Junior Member
Join Date: Jan 2021
Posts: 17
|
|
|
08-31-2021, 01:44 PM | #5 | |
Super Moderator
Join Date: Jan 2007
Location: Dalton, GA
Posts: 3,996
|
Quote:
Login or Register to Remove Ads |
|
|
08-31-2021, 02:45 PM | #6 |
Junior Member
Join Date: Jan 2021
Posts: 17
|
Test-
|
|
08-31-2021, 04:52 PM | #8 |
Super Moderator
Join Date: Jan 2007
Location: Dalton, GA
Posts: 3,996
|
Generally, it saves space on the site and allows for higher quality images to be shared. For most things it's not a big deal. But when you're trying to show someone a metal shaving on an oily part, it can make a big difference.
|
|
Tags |
crankshaft |
|
|