Fuel petcock feed elbow

Roadking · 03-22-2023, 12:25 PM

Hi there,
Its almost time for my annual trip to Florida! I dewinterized my 99 250 and the petcock is leaking around the rotating selector valve. Thats an easy fix once I procure an O ring, but the 90 deg elbow slides out of the petcock a bit too easily. Is that supposed to do that??? It don't appear to be broken, just slides out.

WastelandParadise · 08-20-2024, 11:26 PM

I rebuilt my petcock not long ago and I don't remember that piece coming out. If you take it apart, you'll likely have to replace the little diaphragm because it'll get all torn up from being in one place for so long. Did you wind up taking it apart?

03-22-2023, 12:25 PM	#1
Roadking Member Join Date: Apr 2017 Location: South of Atlanta Posts: 50	Fuel petcock feed elbow Hi there, Its almost time for my annual trip to Florida! I dewinterized my 99 250 and the petcock is leaking around the rotating selector valve. Thats an easy fix once I procure an O ring, but the 90 deg elbow slides out of the petcock a bit too easily. Is that supposed to do that??? It don't appear to be broken, just slides out. __________________ 1999 GZ 250 SuzyQ 1999 GZ 250 Rosey 2002 Electraglide 2003 Heritage 100 Anniv Login or Register to Remove Ads
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-20-2024, 11:26 PM	#2
WastelandParadise Junior Member Join Date: Aug 2024 Posts: 4	I rebuilt my petcock not long ago and I don't remember that piece coming out. If you take it apart, you'll likely have to replace the little diaphragm because it'll get all torn up from being in one place for so long. Did you wind up taking it apart?
	0