Exhaust Rocker Arm Play

mrk4113 · 04-24-2021, 06:38 PM

Hi All,

First time poster. I undertook my first valve adjustment last weekend. Only the exhaust valves were out of spec, so I adjusted the gap to .006", which is .001" out of spec (manual says .003" - .005"), but I figured it was close enough to see.

I started the bike up, no issues, but there was a really loud clacking sound that seemed to be coming from the exhaust valves, so I shut everything down. Bike was running for 10 secs max, before I turned it off.

This weekend, I decided to have another go and adjust the exhaust valves to within spec. I decided, before making any adjustments, I'd check to see what the exhaust valve gap was at TDC.

I was using my feeler gauge to measure the gap between the valve stem and rocker arm, when I realized there's a fair amount of play on my rocker arm. I can physically shift the rocker arm up and down when the engine is at TDC. The intake arm does not do this.

Is this normal?

mrk4113 · 04-25-2021, 04:42 PM

Nevermind, just a motorcycle noob. As soon as I adjusting the gap, everything started tightening up. I was able to set the valve / rocker arm gap to spec by tightening the screw.

04-24-2021, 06:38 PM	#1
mrk4113 Junior Member Join Date: Apr 2021 Posts: 2	Exhaust Rocker Arm Play Hi All, First time poster. I undertook my first valve adjustment last weekend. Only the exhaust valves were out of spec, so I adjusted the gap to .006", which is .001" out of spec (manual says .003" - .005"), but I figured it was close enough to see. I started the bike up, no issues, but there was a really loud clacking sound that seemed to be coming from the exhaust valves, so I shut everything down. Bike was running for 10 secs max, before I turned it off. This weekend, I decided to have another go and adjust the exhaust valves to within spec. I decided, before making any adjustments, I'd check to see what the exhaust valve gap was at TDC. I was using my feeler gauge to measure the gap between the valve stem and rocker arm, when I realized there's a fair amount of play on my rocker arm. I can physically shift the rocker arm up and down when the engine is at TDC. The intake arm does not do this. Is this normal? Login or Register to Remove Ads
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

04-25-2021, 04:42 PM	#2
mrk4113 Junior Member Join Date: Apr 2021 Posts: 2	Nevermind, just a motorcycle noob. As soon as I adjusting the gap, everything started tightening up. I was able to set the valve / rocker arm gap to spec by tightening the screw.
	1