|
10-07-2020, 01:50 PM | #1 |
Junior Member
Join Date: Oct 2020
Posts: 2
|
Bad Head
I am looking at a little Canadian Marauder 250 that has a bad valve seat, the owner has stated that the seat is impossible to replace/find.
Had a quick look around and finding a good head does not seem to be really easy. Can anyone confirm if this is a bad project to take on? Thanx Login or Register to Remove Ads |
|
10-07-2020, 05:18 PM | #2 |
Senior Member
Join Date: May 2015
Location: Henderson, NV
Posts: 1,108
|
Check out Partzilla.com and type in the year, model, etc. I think they do have valve seats for the GZ 250. I assume the Marauder engine is the same. Good luck with your search. Valve seats shouldn't be more than $5 or so if available.
|
|
10-15-2020, 02:14 PM | #4 | |
Junior Member
Join Date: Oct 2020
Posts: 2
|
Quote:
I don't think Suzuki has valve seats for any bike. I checked regardless and they don't for this one. Usually this is done using a generic valve seat and machining it in with an interference fit then grinding and polishing it into the needed fit. I was wondering if anyone had ever taken this on. I suspect getting a used head is the only way to make this bike worth while, but like I said, I don't see those for a reasonable price. They run about $500 Cad and a new head runs about $825 Cad I see a new head on Aliexpress for just under $500 tho that's likely low quality... The bike is only $300 Cad but I am going to pass on it. |
|
|
Thread Tools | |
Display Modes | |
|
|