Replace rear seat and rear fender

Sean250 · 07-11-2018, 10:15 AM

Hi...I would like to replace my OEM 2000 GZ250 rear seat and rear fender with bobber style replacements. I do not believe there are any aftermarket kits to do this. I’ve already relocated my rear lights and license plate. I just need to find suitable parts that would be a close fit. I figure my local bodyshop can help install them with a few modifications if needed (I do not have welding experience). Any suggestions would be much appreciated.

lordalydar · 04-11-2019, 10:21 AM

I was wondering the same thing.

Vegas Street Rider · 04-11-2019, 03:43 PM

I am not that talented to be of any help to you regarding fabricating a bobber rear fender and seat, but there are lots of members that have gone that route on this forum. I would suggest you check through the threads and PM some of them for advice. I have seen some pretty great mods on here.

wacio · 04-16-2019, 10:43 PM

Go looking for correctly sized trailer fenders, something like this:
https://www.etrailer.com/Trailer-Fen.../CE17900G.html
It will come galvanized (for rust resistance) and all you need to do is drill for mounting and paint to your preferred color.

07-11-2018, 10:15 AM	#1
Sean250 Junior Member Join Date: Jul 2018 Posts: 1	Replace rear seat and rear fender Hi...I would like to replace my OEM 2000 GZ250 rear seat and rear fender with bobber style replacements. I do not believe there are any aftermarket kits to do this. I’ve already relocated my rear lights and license plate. I just need to find suitable parts that would be a close fit. I figure my local bodyshop can help install them with a few modifications if needed (I do not have welding experience). Any suggestions would be much appreciated. Login or Register to Remove Ads
	0

04-11-2019, 03:43 PM	#3
Vegas Street Rider Senior Member Join Date: May 2015 Location: Henderson, NV Posts: 1,108	I am not that talented to be of any help to you regarding fabricating a bobber rear fender and seat, but there are lots of members that have gone that route on this forum. I would suggest you check through the threads and PM some of them for advice. I have seen some pretty great mods on here. Login or Register to Remove Ads
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

04-11-2019, 10:21 AM	#2
lordalydar Junior Member Join Date: Apr 2019 Posts: 1	I was wondering the same thing.
	0

04-16-2019, 10:43 PM	#4
wacio Senior Member Join Date: Apr 2016 Location: Illinois Posts: 174	Go looking for correctly sized trailer fenders, something like this: https://www.etrailer.com/Trailer-Fen.../CE17900G.html It will come galvanized (for rust resistance) and all you need to do is drill for mounting and paint to your preferred color.
	0