|
04-29-2017, 09:38 PM | #1 |
Junior Member
Join Date: Sep 2014
Location: New Brunswick, Canada
Posts: 13
|
soft disc brake
just getting my 250 going again after a long winter. my disc brake lever feels like a soft brake pedal in a car. was great/firm when I put it away last fall. it will pump up if you pull it 4 or 5 times. lots of fluid in the reservoir. any ideas what went bad?
Login or Register to Remove Ads |
|
04-29-2017, 11:34 PM | #2 |
Senior Member
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
|
Have you checked for a small leak somewhere. A tiny bit of fluid going AWOL and a little air in the system will give you a soft brake lever. Without a firm one pull front brake you should not be riding. Take care and do it right. We don't want your next post coming from a hospital bed.
|
|
04-30-2017, 08:32 AM | #4 |
Junior Member
Join Date: Sep 2014
Location: New Brunswick, Canada
Posts: 13
|
Thanks guys. I am changing that front tire soon as everything arrives. May try bleeding that today. Any suggestions for the best job done? This bike had been sitting a few years and I've run it a couple summers now and this is the first real issue to pop up.
|
|
04-30-2017, 09:32 AM | #5 |
Senior Member
Join Date: Feb 2010
Location: P.E.I. Canada
Posts: 3,784
|
Bleeding is easy......Make sure you keep resovior topped up as your doing it....Put a clear hose over bleeder & into a small jar.....Pump up lever till firm.....While keeping pressure on lever open bleeder slowly......You will here & feel the fluid & air escaping....when lever bottoms out close bleeder & release lever.......Repeat till you have firm lever & nice clean fluid coming out........You now have done two things......Bled & flushed the system of all old dirty fluid.
Login or Register to Remove Ads |
|
05-09-2017, 07:19 PM | #7 |
Junior Member
Join Date: Sep 2014
Location: New Brunswick, Canada
Posts: 13
|
got the brake bled with no problems. thanks for the help guys. changed out the front tire at the same time. just waiting for the rain to stop
|
|
Thread Tools | |
Display Modes | |
|
|