Go Back   GZ 250 Forums > GZ250-Specific > General GZ250 Talk

Reply
 
Thread Tools Display Modes
Old 04-14-2017, 11:32 PM   #1
spldart
Senior Member
 
spldart's Avatar
 
Join Date: May 2015
Location: Stafford, Texas
Posts: 604
Thumbs Up berryman chem dip'd my carb :D

Pulled and tore down the carb. Dipped and cleaned everything metal.
Hopefully it runs as good as it looks. It hasn't been cleaned since the motor let go and sprayed it in motor oil. Total mess :/

Attached Images
File Type: jpg 20170414_212531.jpg (97.4 KB, 54 views)



Login or Register to Remove Ads
spldart is offline  
Reply With Quote
Old 04-15-2017, 02:19 AM   #2
Vegas Street Rider
Senior Member
 
Join Date: May 2015
Location: Henderson, NV
Posts: 1,108
Looks clean as a whistle.
Vegas Street Rider is offline  
Reply With Quote
Old 04-15-2017, 06:59 PM   #3
spldart
Senior Member
 
spldart's Avatar
 
Join Date: May 2015
Location: Stafford, Texas
Posts: 604
And because I'm trying to escape a NAG!....

I did my 600 mile oil change and through another filter at it.
C&L'd the throttle cables.
Cleaned the engine.
Pulled the chain guard and scraped the greasy packed crap underneath.
C&L'd the chain.
Adjusted the chain.
Replaced the master link as it was loose.
Attempted further repair of exhaust leak underneath the heat shield.
Retorqued head and cyl bolts.
etc etc etc



Login or Register to Remove Ads
spldart is offline  
Reply With Quote
Old 04-15-2017, 11:20 PM   #4
Vegas Street Rider
Senior Member
 
Join Date: May 2015
Location: Henderson, NV
Posts: 1,108
It's like another wife, isn't it? We recently had some rain in Las Vegas and my bike has been screaming at me to get it clean again. I may have to take part of Easter Sunday to take care of it so I can get some sleep. Or maybe I'mjust anal.
Vegas Street Rider is offline  
Reply With Quote
Old 04-19-2017, 07:08 PM   #5
spldart
Senior Member
 
spldart's Avatar
 
Join Date: May 2015
Location: Stafford, Texas
Posts: 604
Had a little adventure with this carb.
Went for a long ride Monday and the bike started flooding. Had to push it about 6 miles home.
That night I immeadiately thought about how the float was set WAY off spec according to the service
manual and I had to reset it quite a bit.
So I popped the carb and checked. WAY flooding.
Apparently the previous owner or his mechanic new the float was heavy and compensated for it.
I screwed that up setting it as the manual said.
I put it back 'eyeball guess' to what it was and today I had a beautiful running machine.
From before dipping the carb to fixing the float issue......
I have much improved cold start and run. Stable idle. And my full power seems to be back.

Now my only problem is that engine rap'n sound.



Login or Register to Remove Ads
spldart is offline  
Reply With Quote
Old 04-21-2017, 03:15 AM   #6
Water Warrior 2
Senior Member
 
Join Date: Dec 2006
Location: Squamish B.C Canada
Posts: 11,409
[QUOTE=spldart;

Now my only problem is that engine rap'n sound.[/QUOTE]
Is there a chance the "rap" may be piston slap? Just a shot in the dark seeing as you have done so much to track the noise and it is still there.
Water Warrior 2 is offline  
Reply With Quote
Old 04-21-2017, 07:11 AM   #7
spldart
Senior Member
 
spldart's Avatar
 
Join Date: May 2015
Location: Stafford, Texas
Posts: 604
Quote:
Originally Posted by Water Warrior 2 View Post
Is there a chance the "rap" may be piston slap? Just a shot in the dark seeing as you have done so much to track the noise and it is still there.
It does sound like bad piston slap.
But this is with the new piston cylinder kit from china.
Waiting on another set of gaskets to open it back up.
spldart is offline  
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:40 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.