Indicator issue

sLeedham · 11-08-2015, 06:27 AM

Hey again,
My GZ125 failed MOT yesterday

I know how to sort everything except one of the things they failed me on was offside front indicator not working. It does work when the engine is running but not when it is off.
Any ideas guys?
Thanks

alantf · 11-09-2015, 06:12 AM

never heard of this before

Try the simple things first. Could be (clutching at straws here) a weak bulb filament, or loose earth. Possibly, because it sounds like the extra voltage that the bike puts out when it's running, is making the indicator work.

BTW, whereabouts in Devon are you? I had some good holidays in Torquay in the 1970s.

Water Warrior 2 · 11-09-2015, 10:59 PM

Just wondering if the GZ 125 does this according to design. Do we have another 125 owner on site to help out?

alantf · 11-10-2015, 04:59 AM

I think that if it was by design, both indicators wouldn't work. Sounds like it's voltage related to a certain area.

blaine · 11-10-2015, 08:06 AM

Quote:

Originally Posted by alantf

I think that if it was by design, both indicators wouldn't work. Sounds like it's voltage related to a certain area.

I agree......start with replacing the bulb.........mine did the same thing..The vibration of the running engine was enough to make the filament make contact.

sLeedham · 11-10-2015, 09:02 PM

Quote:

Originally Posted by alantf

BTW, whereabouts in Devon are you? I had some good holidays in Torquay in the 1970s.

From Torquay

Will try changing the bulb. See if that helps.

Thanks guys!

11-08-2015, 06:27 AM	#1
sLeedham Junior Member Join Date: Aug 2015 Location: Devon, England Posts: 6	Indicator issue Hey again, My GZ125 failed MOT yesterday I know how to sort everything except one of the things they failed me on was offside front indicator not working. It does work when the engine is running but not when it is off. Any ideas guys? Thanks Login or Register to Remove Ads
	0

11-09-2015, 06:12 AM	#2
alantf Senior Member Join Date: Nov 2008 Location: Tenerife (Spain) Posts: 3,719	never heard of this before Try the simple things first. Could be (clutching at straws here) a weak bulb filament, or loose earth. Possibly, because it sounds like the extra voltage that the bike puts out when it's running, is making the indicator work. BTW, whereabouts in Devon are you? I had some good holidays in Torquay in the 1970s. __________________ By birth an Englishman, by the grace of God a Yorkshireman.
	0

11-09-2015, 10:59 PM	#3
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	Just wondering if the GZ 125 does this according to design. Do we have another 125 owner on site to help out? Login or Register to Remove Ads
	0

11-10-2015, 04:59 AM	#4
alantf Senior Member Join Date: Nov 2008 Location: Tenerife (Spain) Posts: 3,719	I think that if it was by design, both indicators wouldn't work. Sounds like it's voltage related to a certain area. __________________ By birth an Englishman, by the grace of God a Yorkshireman.
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode