Gz250 Will Not Start With Video

Mr Horta · 09-22-2015, 04:51 PM

Hello All!
My Gz250 sat in the rain last night and somehow water got in the tank.
When I went to start it it did not turn on, so I emptied the tank and cleaned the carburetor. Now it only starts when i spray a little bit of starting fluid. Has anyone else had this problem before? If so how did you fix it? I'm kind of new to this but i really just want to get back on the road....

Water Warrior 2 · 09-22-2015, 07:26 PM

I'm not much help with the innards of a carb but I have an idea or 2. Did you have the carb off the bike? If so, did you reconnect the choke cable? Did you get the vacuum hoses on the rear of the fuel switch on correctly? One might not be on and is drawing air into the engine and leaning out the fuel mixture?
Some one with more experience will be along shortly to expand on my ideas and likely know of the problem and the actual fix. I doubt it is a serious problem so hang in there.

Mr Horta · 09-22-2015, 08:18 PM

Thank you for replying I appreciate it a lot!! I did have the carb off and took the bowl out sprayed a little bit of carb cleaner but did not mess with the internals when I placed the carb back on the bike I made sure to reconnect all hoses exactly how it was taken off also when I took the carb out I got really watered down gas

blaine · 09-22-2015, 08:38 PM

Sounds like the float may be stuck blocking the flow of fuel to fill the bowl.Try tapping on the side of the bowl that may free the hung up float.

Mr Horta · 09-22-2015, 08:46 PM

Thank you for your reply! I'm about 20 minutes from my house should I tap it with a wrench or just small taps with my hand? I'll let you know what happens

Mr Horta · 09-22-2015, 09:09 PM

i tried tapping on the side and bottom of the bowl no response so I used a wrench...still nothing

blaine · 09-22-2015, 09:16 PM

Quote:

Originally Posted by Mr Horta

i tried tapping on the side and bottom of the bowl no response so I used a wrench...still nothing

Can you open the drain screw to verify if there is fuel in the bowl.......If's its dry you may need to remove the float bowl to unstick the float.

Mr Horta · 09-22-2015, 09:38 PM

I can't seem to unscrew the screw on the bottom of the bowl it is stripped...

blaine · 09-23-2015, 10:29 PM

Would not be spark when it starts on a prime.....You have good fuel flow to fill the bowl right?

Mr Horta · 09-23-2015, 11:36 PM

yeah bowl fills up fast have yet to put carb back on

09-22-2015, 04:51 PM	#1
Mr Horta Junior Member Join Date: Sep 2015 Posts: 14	Gz250 Will Not Start With Video Hello All! My Gz250 sat in the rain last night and somehow water got in the tank. When I went to start it it did not turn on, so I emptied the tank and cleaned the carburetor. Now it only starts when i spray a little bit of starting fluid. Has anyone else had this problem before? If so how did you fix it? I'm kind of new to this but i really just want to get back on the road.... Login or Register to Remove Ads
	0

09-22-2015, 08:18 PM	#3
Mr Horta Junior Member Join Date: Sep 2015 Posts: 14	Thank you for replying I appreciate it a lot!! I did have the carb off and took the bowl out sprayed a little bit of carb cleaner but did not mess with the internals when I placed the carb back on the bike I made sure to reconnect all hoses exactly how it was taken off also when I took the carb out I got really watered down gas Login or Register to Remove Ads
	0

09-22-2015, 08:38 PM	#4
blaine Senior Member Join Date: Feb 2010 Location: P.E.I. Canada Posts: 3,784	Sounds like the float may be stuck blocking the flow of fuel to fill the bowl.Try tapping on the side of the bowl that may free the hung up float. __________________ If at first you do succeed, try not to look surprised.
	0

09-22-2015, 08:46 PM	#5
Mr Horta Junior Member Join Date: Sep 2015 Posts: 14	Thank you for your reply! I'm about 20 minutes from my house should I tap it with a wrench or just small taps with my hand? I'll let you know what happens Login or Register to Remove Ads
	0

09-23-2015, 10:29 PM	#9
blaine Senior Member Join Date: Feb 2010 Location: P.E.I. Canada Posts: 3,784	Would not be spark when it starts on a prime.....You have good fuel flow to fill the bowl right? __________________ If at first you do succeed, try not to look surprised.
	0

09-22-2015, 07:26 PM	#2
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	I'm not much help with the innards of a carb but I have an idea or 2. Did you have the carb off the bike? If so, did you reconnect the choke cable? Did you get the vacuum hoses on the rear of the fuel switch on correctly? One might not be on and is drawing air into the engine and leaning out the fuel mixture? Some one with more experience will be along shortly to expand on my ideas and likely know of the problem and the actual fix. I doubt it is a serious problem so hang in there.
	0

09-22-2015, 09:09 PM	#6
Mr Horta Junior Member Join Date: Sep 2015 Posts: 14	i tried tapping on the side and bottom of the bowl no response so I used a wrench...still nothing
	0

09-22-2015, 09:38 PM	#8
Mr Horta Junior Member Join Date: Sep 2015 Posts: 14	I can't seem to unscrew the screw on the bottom of the bowl it is stripped...
	0

09-23-2015, 11:36 PM	#10
Mr Horta Junior Member Join Date: Sep 2015 Posts: 14	yeah bowl fills up fast have yet to put carb back on
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode