|
|
06-24-2015, 07:22 PM
|
#1 |
|
Junior Member
Join Date: Jun 2015
Posts: 2
|
Help with hose
Hi gz250 enthusiasts, I have a problem finding a connection for one of my hoses. Apparently this hose starts from the valve breather and is supposed to connect to the fuel vapor separator, according to the diagram my bike has under the seat. The odd thing is I can't seem to find this fuel vapor separator which is supposed to be under my gas tank. The hose I am talking about is approximately 6 inches long and has a spring around it. My bike is a 2006 suzuki gz250. If you can help me out it would greatly be appreciated. I tried the dealer and other Motorsport stores but they can't seem to help me. Here are some pictures. Thank you.
Login or Register to Remove Ads Last edited by Wabelon; 06-24-2015 at 07:23 PM. Reason: To add more photos |
|
|
|
06-25-2015, 10:48 AM
|
#2 |
|
Super Moderator
Join Date: Jan 2007
Location: Dalton, GA
Posts: 3,996
|
Is this a California bike? I'm not familiar with that hose at all.
|
|
|
|
|
06-25-2015, 04:53 PM
|
#3 |
|
Junior Member
Join Date: Jun 2015
Posts: 2
|
Yes it is a California bike. People have been telling me it goes under the fuel take where there is a little nipple it connects to but my tank doesn't have a such thing on it. Here's the pic of my tank
Login or Register to Remove Ads |
|
|
|
|
06-26-2015, 09:22 AM
|
#4 |
|
Super Moderator
Join Date: Jan 2007
Location: Dalton, GA
Posts: 3,996
|
There is usually a secondary nipple on the opposite side from the petcock...
Can you show me a picture of where it connects to the bike? Does it go into the carb or what? EDIT: Also, where is your charcoal canister? If this system has been altered or modified by the previous owner, then I would think you could just cap off that vacuum line, zip tie it to your frame, and forget about it. |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
