|
|
09-10-2014, 08:53 AM
|
#1 |
|
Junior Member
Join Date: Sep 2014
Location: Australia n.s.w
Posts: 20
|
Oil filter change and tappet clearance check
Today i bought a new filter/"0" rings-oil and a set of valve adjuster tools not only for this bike but for others that i have.also i am going to fit my new handle bars because mine are bent from the previous owner from dropping the bike.
I am going to try to take photos of each step and post it in "how to do"section,i hope this helps other fellow bikers...ken 1st pic-new handle bars 2nd pic-valve adjuster tools 3rd pic-new filter,"o" rings and oil specific for the bike
__________________
4 wheels move people 2 wheels moves your soul 
Login or Register to Remove Ads Last edited by tintankaussie; 09-12-2014 at 07:38 AM. Reason: Explaning pictures |
|
|
|
09-12-2014, 06:37 AM
|
#2 |
|
Junior Member
Join Date: Sep 2014
Location: Australia n.s.w
Posts: 20
|
oil change-tappet clearance-part 1
Well,today after work i changed my oil/filter and adjusted my tappets.took some pics of the progress.both of these tasks are already in the "how to"section so i thought i post some pictures just to help others.
This process took me 1.5 hours with 2 coffees on the go...ken 1st pic-used oil container 2nd pic-cut out side of container for my draining oil 3rd pic-disconnecting fuel line and replace with new on 4th pic-lower hose is fuel,upper hose is vaccuum,both go to fuel tap (pet-cock) 5th pic-tappet tool and guidence from manual
__________________
4 wheels move people 2 wheels moves your soul
Last edited by tintankaussie; 09-12-2014 at 07:47 AM. Reason: Explaning pictures |
|
|
|
|
09-12-2014, 06:46 AM
|
#3 |
|
Junior Member
Join Date: Sep 2014
Location: Australia n.s.w
Posts: 20
|
oil change/tappet clearance-part 2
Not quite sure yet how to put text to pictures,I"ll work it out.
1st pic-adjusting exhaust tappets with feeler gauge and tappet adjuster tool 2nd pic-same as 1st pic,different angle 3rd pic-old oil filter with the kms writen on for next due service 4th pic-new filter about to go in 5th pic-old "o" rings,the small new one is already on the filter post ready for new filter
__________________
4 wheels move people 2 wheels moves your soul
Login or Register to Remove Ads Last edited by tintankaussie; 09-12-2014 at 07:57 AM. Reason: Explaining pictures |
|
|
|
|
09-12-2014, 06:53 AM
|
#4 |
|
Junior Member
Join Date: Sep 2014
Location: Australia n.s.w
Posts: 20
|
Part 3 completed
I remember from other posts,dont forget to fill with oil and connect vaccuum hose for fuel flow-replaced fuel line (old one all cracked).
started bike and checked for fuel/oil leaks and went for a spin,all good...ken
__________________
4 wheels move people 2 wheels moves your soul
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
