2+ hp

raul10141964 · 08-17-2014, 02:55 PM

-------------------------GZ250------------------GN250
HP---------------------- 20.1@8000rpm------ 22@8500rpm
torke (Nm)-------------18.7@7000rpm -------19@6500rpm
compresion ------------9:1-------------------- 8.9:1
carburator-------------- 32mm ----------------34mm
main jet-----------------120 --------------------130

cheking the specs of the GZ250 and the GN250 probe whee can gain 2HP swapping carburators

Water Warrior 2 · 08-17-2014, 05:43 PM

The GZ would certainly benefit from a couple extra ponies. I wonder if both engines have the same can shaft specs? If they are the same it is good news. If they are different we have an option to increase the power a little more. Likely both the cam and carb are the reason for the increase. ........................We need a volunteer and a project bike.

raul10141964 · 08-17-2014, 06:19 PM

The cams and valves are the same.

with the peak HP on the GN at 8500 and the GZ at 8000 I gees the red line is between 9000 and 10000 RPM

08-17-2014, 02:55 PM	#1
raul10141964 Senior Member Join Date: Apr 2012 Location: Elkhart, Indiana Posts: 369	2+ hp -------------------------GZ250------------------GN250 HP---------------------- 20.1@8000rpm------ 22@8500rpm torke (Nm)-------------18.7@7000rpm -------19@6500rpm compresion ------------9:1-------------------- 8.9:1 carburator-------------- 32mm ----------------34mm main jet-----------------120 --------------------130 cheking the specs of the GZ250 and the GN250 probe whee can gain 2HP swapping carburators Login or Register to Remove Ads Last edited by raul10141964; 08-17-2014 at 02:59 PM.
	0

08-17-2014, 06:19 PM	#3
raul10141964 Senior Member Join Date: Apr 2012 Location: Elkhart, Indiana Posts: 369	The cams and valves are the same. with the peak HP on the GN at 8500 and the GZ at 8000 I gees the red line is between 9000 and 10000 RPM Login or Register to Remove Ads
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-17-2014, 05:43 PM	#2
Water Warrior 2 Senior Member Join Date: Dec 2006 Location: Squamish B.C Canada Posts: 11,409	The GZ would certainly benefit from a couple extra ponies. I wonder if both engines have the same can shaft specs? If they are the same it is good news. If they are different we have an option to increase the power a little more. Likely both the cam and carb are the reason for the increase. ........................We need a volunteer and a project bike.
	0