My First Mod for the New Year

Easy Rider · 04-07-2008, 09:14 PM

Will be to UNDO one from last year.

Last year I drilled the back plate on the muffler. Did it late in the year and didn't notice too much difference. WELL......the first couple of rides this spring I noticed a plusating sound at one intermediate RPM range (in all gears). Then I noticed that it rumbles at cruising speed. Both things are very annoying.

Out comes that tap set and the stainless steel bolts. It's back to stock for me.

Looks like the only permanent change I will have is the 16T front sprocket (unless you count the windshield).

04-07-2008, 09:14 PM	#1
Easy Rider Senior Member Join Date: May 2007 Location: Champaign, Illinois Posts: 4,561	My First Mod for the New Year Will be to UNDO one from last year. Last year I drilled the back plate on the muffler. Did it late in the year and didn't notice too much difference. WELL......the first couple of rides this spring I noticed a plusating sound at one intermediate RPM range (in all gears). Then I noticed that it rumbles at cruising speed. Both things are very annoying. Out comes that tap set and the stainless steel bolts. It's back to stock for me. Looks like the only permanent change I will have is the 16T front sprocket (unless you count the windshield). __________________ Loud pipes risk rights! Login or Register to Remove Ads
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode