Go Back   GZ 250 Forums > GZ250-Specific > Troubleshooting

Reply
 
Thread Tools Display Modes
Old 09-14-2013, 12:21 PM   #1
wpbfrider_11
Junior Member
 
Join Date: Apr 2011
Location: west palm beach, FL
Posts: 6
wont start now

Had my bike for a couple years now bought it brand new out of the show room and rode it everywhere its a 2009 got it with 0 miles now has over 17k I have always done the maintenance myself.

Well one day I was riding and the spark plug shot out of the engine but luckily the threads were still there so I put it back in and kept riding then it happened again about a 1000 miles later but the treads were shot so I parked it till I got the time to rethread it so I took the head off did a new head gasket too wasn't to hard I put it back together and triedstarting it up it sputtered a little bit and would fire but die instantly. I checked for spark have good spark. Cleaned the carb so should be getting fuel. Tried starting it again and same results so I checked the timing and I had the cam timing backwards so I changed it. By backwards I mean when the marks are supposed to be lined up they were but the cam was upside down I think the technical term would be 180° off. But after changing it I still get a sputter like it is trying to fire but now it doesn't even fire.

I don't know if there is something I'm missing or if the engine is just at the end of its life



Login or Register to Remove Ads
wpbfrider_11 is offline  
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:17 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.