16 tooth sprocket surprise

advant63 · 03-05-2011, 11:12 PM

i replaced the front sprocket today. when i looked at the lockwasher i found that it had been damaged . half of the splines were crushed as if the nut had been tightened with the washer misaligned. as it has less than one mile i will assume it happened at the factory.
i hammered it flat and refit it. i hope that's the only q.c. oversight.

03-05-2011, 11:12 PM	#1
advant63 Member Join Date: Jan 2011 Location: ontario, canada Posts: 30	16 tooth sprocket surprise i replaced the front sprocket today. when i looked at the lockwasher i found that it had been damaged . half of the splines were crushed as if the nut had been tightened with the washer misaligned. as it has less than one mile i will assume it happened at the factory. i hammered it flat and refit it. i hope that's the only q.c. oversight. Login or Register to Remove Ads
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode