The front brake lever won't go back as normal

GZ250 · 04-30-2009, 01:03 PM

The front brake lever is working ok, I put the new brake pads yesterday but the problem that I am going to mention started before installing the new pads. The lever won't go back fast and so the brake lights remain on for a while. It takes like 10-15 second to move back and than i hear the click of the cut off button from the brakes. I think the piece that pushes the lever back (arrow in picture) is stuck. It needs replacement, lubing or did I put more oil.

Thanks as always for answers.

Added later: Check the other post my me, where I say front brake lever - screwed up. i tried to change he brake fluid and ended up having no brake at all.

04-30-2009, 01:03 PM	#1
GZ250 Senior Member Join Date: May 2007 Location: North Carolina Posts: 334	The front brake lever won't go back as normal The front brake lever is working ok, I put the new brake pads yesterday but the problem that I am going to mention started before installing the new pads. The lever won't go back fast and so the brake lights remain on for a while. It takes like 10-15 second to move back and than i hear the click of the cut off button from the brakes. I think the piece that pushes the lever back (arrow in picture) is stuck. It needs replacement, lubing or did I put more oil. Thanks as always for answers. Added later: Check the other post my me, where I say front brake lever - screwed up. i tried to change he brake fluid and ended up having no brake at all. __________________ “God creates out of nothing. Wonderful you say. Yes, to be sure, but he does what is still more wonderful: he makes saints out of sinners.” “People understand me so poorly that they don't even understand my complaint about them not understanding me.” --- Søren Kierkegaard --- Login or Register to Remove Ads
	0

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode