|
Any comments? I replaced the main diaphragm and drained and took off petcock and cleaned and drained the tank and put fresh fuel. I adjusted the valves, they were slightly out but not so much... both on the lower side. Intake at .001 and exhaust. 0025. Bike had to push start, with a fresh battery(stator issue?)
Bike would only start with the choke off, if throttle is lethe go it dies. Smoke puffing out of the front and oil on the front of the jug. Pooling on several of the blades. Head gasketc blown causing massive compression loss being the bane of this 250?
|