GZ 250 Forums - View Single Post

Vegas Street Rider · 07-17-2016, 10:29 AM

I can't tell much from the pictures but it looks like the crankcase breather hose. It should run between the air box and the crankcase. The hose should attach to the crankcase on the left side of the bike just above the front sprocket. It looks like your lock ring is gone from the end of the hose to hold it in place. Hope this helps solve your problem BigBoss319.

Disregard that. I see where yours is attached. Their should be a hose that attaches to the right side of the carb body just behind the throttle cable guide. Check to see if one is attached there. If not, that's probably the right one. Someone else will probably come on and pinpoint it for you if that is not right.

07-17-2016, 10:29 AM	#2
Vegas Street Rider Senior Member Join Date: May 2015 Location: Henderson, NV Posts: 1,112	I can't tell much from the pictures but it looks like the crankcase breather hose. It should run between the air box and the crankcase. The hose should attach to the crankcase on the left side of the bike just above the front sprocket. It looks like your lock ring is gone from the end of the hose to hold it in place. Hope this helps solve your problem BigBoss319. Disregard that. I see where yours is attached. Their should be a hose that attaches to the right side of the carb body just behind the throttle cable guide. Check to see if one is attached there. If not, that's probably the right one. Someone else will probably come on and pinpoint it for you if that is not right. Last edited by Vegas Street Rider; 07-17-2016 at 10:41 AM. Reason: Correction.
	0