GZ 250 Forums - View Single Post

**jonathan180iq** · 08-22-2013, 08:58 AM

I was thinking something along these lines too.

When is the last time you did a brake flush? It takes less than a bottle of brake fluid do a whole system flush and bleed on these bikes.
Lube the caliper slides, obviously. And then flush and bleed your brake lines. It sounds like there is air in the system, probably down at the caliper, and it's giving a false engage on the piston.

08-22-2013, 08:58 AM	#8
jonathan180iq Super Moderator Join Date: Jan 2007 Location: Dalton, GA Posts: 3,995	Re: Help after a front brake job I was thinking something along these lines too. When is the last time you did a brake flush? It takes less than a bottle of brake fluid do a whole system flush and bleed on these bikes. Lube the caliper slides, obviously. And then flush and bleed your brake lines. It sounds like there is air in the system, probably down at the caliper, and it's giving a false engage on the piston.
	0