GZ 250 Forums - View Single Post

Sandmonkee · 06-24-2012, 07:34 PM

Hey guys, thanks for the responses.

The windshield is 17" from the headlight cutout to the top. I started with it right down on the headlight and pretty much parallel with the forks. Then I tried it further back and sitting on top of the speedo. From there I just kind of wiggled it around randomly between the highest and lowest point. Sadly, I'm getting the feeling WW may have it right by calling it a "gremlin" - could be very difficult to eradicate without just getting lucky with an angle that suddenly works...

I will try out all of your suggestions and report back.

06-24-2012, 07:34 PM	#1
Sandmonkee Junior Member Join Date: Apr 2012 Location: Ottawa, Canada Posts: 14	Re: Windshield Hey guys, thanks for the responses. The windshield is 17" from the headlight cutout to the top. I started with it right down on the headlight and pretty much parallel with the forks. Then I tried it further back and sitting on top of the speedo. From there I just kind of wiggled it around randomly between the highest and lowest point. Sadly, I'm getting the feeling WW may have it right by calling it a "gremlin" - could be very difficult to eradicate without just getting lucky with an angle that suddenly works... I will try out all of your suggestions and report back. Login or Register to Remove Ads
	1