Quote:
|
Originally Posted by Rick78
Thanks, where is the mixture screw? So do you think I should take the carb off and clean it again?
|
The mixture screw is in front of the float bowl.It may have a plug in it from the factory,if someone hasn't removed it.If you haven't touched it,than dirt is your likely problem.The carb cleaner may do the trick and save you taking the carb off again.If you want to access the idle mixture screw to adjust it or drill out the factory plug,than you need to remove the carb.There is a good diagram of the carb on page 4-3 in the manual witch can be downloaded here.
viewtopic.php?f=3&t=27