[menesesjesse]

Thanks I am looking for info on the carb rebuild kit. I cleaned out the lower half of the float assembly/needle/jets but the bike runs a little rough at idle and requires min of 10 minutes of choke. Excessive I would think at 60 F. I have a shop nearby that wants 100.00 to run the carb through the tank and reassemble it. Im on the fence here because I didn't take it completely apart not knowing the parts availability and what can cause the hunting or stalling with out a small amount of choke applied. The bike runs well through the gears but has a little backfire on downshifts. Not sure if this is inherent to the GZ250. Thanks for your time
Jesse