GZ 250 Forums - View Single Post - I heard marbles rattling in the engine and it just stopped.

tommyjoebilly · 04-24-2010, 09:42 PM

I thought I responded to this post already. Maybe I didn't click "submit" :retard: I wanted to loosen the chain so I could get the sprocket off at the engine. I did loosen the adjustment nut first, as I didn't know what I was doing. The axle bolt, I now realize has to be loosened on both sides so the wheel can be moved forward. I couldn't budge it and didn't have a breaker bar, so I figured I would get slack on the other end, by moving the engine backwards.

04-24-2010, 09:42 PM	#44
tommyjoebilly Member Join Date: Apr 2010 Location: Connecticut Posts: 36	Re: I heard marbles rattling in the engine and it just stopp I thought I responded to this post already. Maybe I didn't click "submit" :retard: I wanted to loosen the chain so I could get the sprocket off at the engine. I did loosen the adjustment nut first, as I didn't know what I was doing. The axle bolt, I now realize has to be loosened on both sides so the wheel can be moved forward. I couldn't budge it and didn't have a breaker bar, so I figured I would get slack on the other end, by moving the engine backwards.
	0