|
Re: Cleaning and Lubing the drive chain.
The back wheel is held on by basically a bolt with a nut one the end of it, so yes if you loosen the nut on one side (or the bolt head on the other) the result will be the same, the wheel will get loosened.
As for the cotter pin, if you didn't take it out, you could not have turned the other side, without spinning the axle nut and cotter pin around and around, which would mean that you were not loosening anything.
Sorry if that didn't come out clearly, sometimes i don't explain things real well.
__________________
"Tell me what kind of wreck you're going to have and I'll tell you what type of helmet you need." [Author Unknown]
Login or Register to Remove Ads
|