![]() |
My first gz250
i just started riding and this is my first ever bike, when i rode it i fell in love with it and i dont think any bike will ever replace it :biggrin: its still on the trailer in this pic, will upload more when my phone has decided it wants to cooperate
|
Re: My first gz250
Welcome to the club. Waiting for more pics.
|
Re: My first gz250
phones still being slow and unresponsive, but will gladly put up more when it responds to me again
|
Re: My first gz250
:2tup: :2tup:
|
Re: My first gz250
Some more pics, Just for some random knowledge about the bike, its completely stock except for the adjustable front brake handle, and has a crack in the side plastic panel, its a 2003 and its got 20,000 miles on it but i got it for 900 and bike runs very well, except it tends to idle low and cuts off until it warms up, any help would be much appreciated :2tup:
|
Re: My first gz250
The front brake lever is standard fare. As for shutting off until warmed up..........that is quite common. Just run a little choke to help it along until warm enough to idle on it's own.
|
Re: My first gz250
Yep.These bikes need choke till they are fully warmed up.They are set very lean from the factory.A pilot jet (idle mixture) adjustment will help a lot with this problem.
:) :cool: |
Re: My first gz250
And you may want to screw the idle speed up (the big white knob) to 1200 - 1400 RPM when the engine is HOT. If it's not idling fast enough when the engine's hot, then it certainly won't be fast enough when it's cold.
|
Re: My first gz250
Thank you all for the help, I adjusted the idle up and found a sweet spot where it idles perfectly, got to finally take it out for a real run down the straight highway and it topped at 76.4mph. Makes me one happy bike owner since this is not only my first bike, but my first vehicle (I'm 19 by the way, hope that doesnt offend any veteran riders)
|
Re: My first gz250
My candy ass of a 30 year vintage is highly offended by your age, ya whipper snapper.
|
All times are GMT -4. The time now is 06:09 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.