head bolt lengths?
 

I am working on a problem, and just made it worse. I was removing the cover from the cyl head.
I was trying to hurry, so I loosened all the bolts, then grabbed a plastic bag and one-by-one removed them all from the right side and dropped them in the bag - without noticing that they are different lengths!
Yes, it was a dumb move.

The left side is OK, I made note of which goes where. Wish it was a mirror of the left side,
but it isn't.
Can anyone tell me how to get the bolts from the
right side in the right places?
Thanks for any help.

Re: head bolt lengths?
 

My answer is in the other thread. Just to eliminate confusion you may want to stick with one thread. Pick one and we can follow your progress.

Re: head bolt lengths?
 

I read it, and I'm glad I did! It could be the answer to the problem Thanks again.

The reason I started a new thread was because the old one was getting a bit long,
and I didn't want to have folks read three pages of 'old stuff' to get to the 'new'
problems. Also, because we had gotten a bit off topic towards the third page.
You are right, though, it could easily confuse folks trying to help or
just follow process. This one will die asap.