GZ 250 Forums

GZ 250 Forums (http://www.gz250bike.com/forum/index.php)
-   Member Introductions (http://www.gz250bike.com/forum/forumdisplay.php?f=13)
-   -   Rookie Rider of a 2001 GZ250 (http://www.gz250bike.com/forum/showthread.php?t=3649)

rolas69 09-20-2010 02:04 AM

Rookie Rider of a 2001 GZ250
 
Hello everyone,
I got my Bike couple of months ago, I've put over 500 miles since I got it, I'll be posting her pictures probably tomorrow.
2001 GZ250, 5000 miles on it, Windshield, Will and Max Saddle Bags, Engine Guard, Back Rest Luggage rack are some of the goodies that came with her among a 16T Front Sprocket, turn signal alarm and a Tachometer, I went ahead and got a new Custom Exhaust from Ebay to complete her.
I also have some questions about performance that I hope somebody could help me with:

I would like to know if I need to re-jet the Carburetor since there was a changed sprocket and now I just change the muffler?
and if I need to re-jet what are the specs?
Are there any kits for sale anywhere on the web?
My mechanical experience with Motorcycles is slim to none but I can find my way on Cars since I've been working on my 65 Chevy Bel-air.
Any Help will be appreciated :hide:
Rolas69

blaine 09-20-2010 07:05 AM

Re: Rookie Rider of a 2001 GZ250
 
Welcome.You need to re jet since you got new exhaust not because of the sprocket change.There are jet kits available on E-bay but they are expensive & not necessary.You will need to do a needle shim,main jet,and idle mixture adjustment.There are lots of directions under "Performance mods".Main jets can be picked up for a couple of dollars.When I changed my main jet I went from a stock #120 up to a #132.Yours may need to be bigger depending on altitude.A #130 is a good place to start and go from there.All these mods are easier if you take the carb off the bike.
:) :cool:

Easy Rider 09-20-2010 09:37 AM

Re: Rookie Rider of a 2001 GZ250
 
Quote:

Originally Posted by blaine
Welcome.You need to re jet since you got new exhaust not because of the sprocket change.

While the number of riders changing their mufflers ONLY on a GZ is rather slim.......I don't remember any of them reporting that the performance was enough different (any ??) to require a jet change.

Given that it is possible to make things worse and not better when you mess with the carb, I would STRONGLY recommend that you try it out first. I expect that it will be just fine without any changes.

In the end, it might depend on what kind of "muffler" you actually put on it. If it has any real baffles at all, it is unlikely that any change will be needed.

ArizonaKev 09-20-2010 01:04 PM

Re: Rookie Rider of a 2001 GZ250
 
Welcome to the forum rolas! Always great to have another GZ rider, and especially one of a 2001 - which I have a particular affinity for, for some unknown reason! :whistle:


AZ Kev

blaine 09-20-2010 04:41 PM

Re: Rookie Rider of a 2001 GZ250
 
Quote:

Originally Posted by Easy Rider
Quote:

Originally Posted by blaine
Welcome.You may need to re jet since you got new exhaust not because of the sprocket change.

While the number of riders changing their mufflers ONLY on a GZ is rather slim.......I don't remember any of them reporting that the performance was enough different (any ??) to require a jet change.

Given that it is possible to make things worse and not better when you mess with the carb, I would STRONGLY recommend that you try it out first. I expect that it will be just fine without any changes.

In the end, it might depend on what kind of "muffler" you actually put on it. If it has any real baffles at all, it is unlikely that any change will be needed.

:plus1:

rolas69 09-22-2010 01:06 AM

Re: Rookie Rider of a 2001 GZ250
 
Thank you, I've posted pictures on the correct board, they are under Rookie Rider of a 2001 GZ250.
Please let me know what do you think.
Rolas69

GZBrian 02-06-2011 07:50 AM

Re: Rookie Rider of a 2001 GZ250
 
Welcome aboard. Ride safe. GZBrian


All times are GMT -4. The time now is 07:48 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.