GZ 250 Forums

GZ 250 Forums (http://www.gz250bike.com/forum/index.php)
-   General GZ250 Talk (http://www.gz250bike.com/forum/forumdisplay.php?f=15)
-   -   Plugged those exhaust holes (http://www.gz250bike.com/forum/showthread.php?t=1119)

Graydog 07-26-2008 07:24 PM

Plugged those exhaust holes
 
I plugged those holes the previous owner drilled in the exhaust. Big difference in horse power. I think I read here that MPG should improve also. Hope so....I've only been getting 52-54 MPG and that is easy side road riding mixed with very little city driving. (City...did I say city! I'm used to Houston where we have apt. complexes with higher populations than were I live now!)

One thing...On my first ride after plugging the holes the bike missed some on take off. Gradually it has almost corrected itself now and take offs are smooth. Do I need to readjust the jets? And if so can I do it or should I have a shop do it? I have no idea how to do it.
Thanks,

Sarris 07-26-2008 08:16 PM

Holes
 
The previous owner probably did not change the jets or do any carb mods (most don't). I'd leave it and see if the missing subsides as its may be just a carbon build up from running lean w/ the muffler holes or perhaps a worn out spark plug. Wind it out for a few days and see if that makes it go away before you have it looked at. If you use gas without ethanol, you'll probably get into the 68 to 72 mpg range with conservative driving. It's about 6 +/- mpg lower w/ 10 percent ethanol.

:tup:


All times are GMT -4. The time now is 10:06 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.