Front disk brake squeaking
 

Alright....here's a question from a real newbie. I got my GZ250 a month and a half ago and I love her. I noticed that it sounded like the front brake was dragging/squeaking at low speeds. I mentioned this to the mechanic when I took her in for the 600 mile check up and he said they would look at it. Well, it still seems to be doing it. This isn't just dust, it sounds like the pads are actually touching the disk. I have moved the bike around with the engine off and it's very noticeable. What should I do????

Re: Front disk brake squeaking
 

It's a GZ trait. Mine does it at any given speed or with any other variables there might be. There isn't a set pattern. They just squeak. I've seen others on here say the same. Don't worry about; just make sure that the pads are still in good shape. :tup:

Squeaking Brakes
 

Most all GZ disk brakes exhibit some squeak or squeal upon use. The disk brake pads do stay in contact with the rotor, this is normal. That being said, they should not grind or squeak when not engaged. I have had disk brake pads in the past with a foreign object embedded in the pad (a small piece of metal) that caused a constant grinding and/or squeaking noise and eventually ruined the rotor. I would suggest you get on the dealers ass and have the pads removed and inspected. Also, I would do a visual on the rotor and see if the are any gall marks or grooves forming.

If they won't do it, I'd tell you to download the service manual on this site and visually inspect the pads yourself. Better safe than sorry. Replacement disk brake pads are a helluva lot cheaper than replacing the rotor.

Good luck and keep us advised on your progress or repair.

:chop:

Re: Squeaking Brakes
 

I dunno, Sarris, I've only had my bike for about a month and a half also, and the pads on it squeak pretty much all the time, too. Occassionally (sp?) they'll stop, but there isn't a rhyme or reason to them.

Squeaking Brakes
 

Brother, mine make NO noise until engaged, then I get a light squeal that fades as additional lever pressure is applied.

Like I said, better safe than sorry. Your bike, your choice.

:)

Re: Squeaking Brakes
 

Same here. I've heard a LOT of Suki owners complain about noisy brakes WHEN THEY ARE APPLIED on various models including the GZ but you two are the first I have heard complain about noises when they are NOT being used.

My bike wasn't new when I got it so I can't say if it's normal for really low mileage or not. I've got 3K on the clock now and it certainly hasn't done it since I got it at about 2K.

It's possible that the pads are not "broken in" yet but are glazed from light use.
Have you tried a few "hard" stops ? .....away from traffic, of course.

Thanks for all the input guys. I really appreciate it. I would expect a little squeaking when the brakes are first applied, but this is with NO pressure on the brake lever, not even touching the brake lever, and moving the bike, say, backwards into a rather tight parking space that I have next to my truck in the garage. I can hear something in contact with the rotor as the wheel moves. I kinda thought there might be some kind of adjustment I could make to the caliper; is there a spec for clearance between the pads and the rotor in the open position? I guess I could get off me a#s and look in the manual that is on this same site, couldn't I?

Re: Squeaking Brakes
 

No clearance at all. No available adjustment. You might take Easy's advice and try a couple hard stops as it make stop the noise. Otherwise, I'd visually inspect the pads.

:)

Re: Squeaking Brakes
 

I get a light squeal occasionally too, and this usually fixes it. I've noticed it the most when I'm going really slow, like pulling into parking spaces, but I don't notice it all the time.

Mine squeals when the rotors are cold (relatively). After about 5-10 minutes of stop & go riding, I seldom hear a squeal again.

I'll try the "hard stop" that Easy Rider recommended. The only thing that concerns me is the fact that I can hear the pads rubbing against the rotor with the brake completely disengaged. That's what made me think that there was something our of spec with the brake caliper. I'll do some experimentation tomorrow and get back with everyone. Thanks again for the input....you guys are great!

The rotor is metal and will oxodize/rust a bit whenever parked. The pads and rotor probably are glazed a bit too. Practice some hard stops. This will burn off the glazing/rust deposits. The front brake will also work a lot better.

You just need to get over this idea that disk brakes are supposed to be "completely disengaged". They don't work like that.
The pads lightly touch the rotors at all times.......or come VERY VERY VERY close.
Because of this, dirt, sand or even brake dust can make a grinding or squeeking noise.
There is no adjustment. They are , by design, self adjusting.

Then that's one less thing to worry about... Thanks!

Unless the bike is old and parts inside the caliper housing have worn out. That's pretty rare but it happens.

No, she's brand new; 750 miles. I won't worry about it since it seems to be normal. I just wanted to make sure.