GZ 250 Forums
Page 5 of 5 « First 34 5
Show 40 post(s) from this thread on one page

GZ 250 Forums (http://www.gz250bike.com/forum/index.php)
-   Troubleshooting (http://www.gz250bike.com/forum/forumdisplay.php?f=19)
-   -   Little Help Please :) (http://www.gz250bike.com/forum/showthread.php?t=4291)

dspdr 08-22-2011 12:26 PM
Re: Little Help Please :)
 
Gzrider, thank you...
I took it to the shop and they are telling me $600 to fix head gasket and rebuild carb.. i think that is a little high, and based on what you told me the gasket should not be the problem as to why it cuts off.. i am going to have them rebuild the CARB only and see if i can ride it without it cutting off. if so i am good til next yr when i will be moving up to a 500 or 650.. this bike will become a training bike for the whole family. thanks to everyone for the help..

Gz Rider 08-23-2011 12:27 AM
Re: Little Help Please :)
 
...

alantf 08-23-2011 04:14 AM
Re: Little Help Please :)
 
Quote:
Originally Posted by dspdr
this bike will become a training bike for the whole family.
Don't forget that a training bike needs to be "better" than a "normal" bike, so that the learner can concentrate on his/her riding skills, with a bike that behaves correctly, rather than having to deal with any mechanical problems as they learn. :) Make sure it's 100% before you let them on it. :2tup:

Water Warrior 2 08-23-2011 03:52 PM
Re: Little Help Please :)
 
Quote:
Originally Posted by alantf
Quote:
Originally Posted by dspdr
this bike will become a training bike for the whole family.
Don't forget that a training bike needs to be "better" than a "normal" bike, so that the learner can concentrate on his/her riding skills, with a bike that behaves correctly, rather than having to deal with any mechanical problems as they learn. :) Make sure it's 100% before you let them on it. :2tup:
Absolutely agree with that. You wouldn't take flying lessons in an almost good enough aircraft so why take riding lessons on an almost good enough bike.

dspdr 08-24-2011 04:08 AM
Re: Little Help Please :)
 
u guys r right.. i just hate spending the money 4 something thats not the main problem. the shop would not give me a straight answer as 2 why it cuts off, they want 2 fix both issues that i told them about..they said then it will be a smooth runnin bike. so i may just bite the bullet..n fix everything.. thanks 4 the help. this is a great site..

Gz Rider 08-24-2011 01:03 PM
Re: Little Help Please :)
 
...

jonathan180iq 08-24-2011 01:46 PM
Re: Little Help Please :)
 
The fact that the smoking has stopped and you don't see oil seeping out from around the base of the head tells me that there isn't a head gasket problem.

Engines that have been sitting for a long time will tend to smoke. Nothing weird about that. If it doesn't come back, there isn't a problem.
And if there isn't a problem, then there is no reason throwing money at it.

To deal with the bike cutting off as it comes down to idle speed, have you tried simply adjusting the idle speed? There is large screw on the side you can turn to raise the idle just a bit.

blaine 08-24-2011 04:18 PM
Re: Little Help Please :)
 
Quote:
Originally Posted by jonathan180iq
The fact that the smoking has stopped and you don't see oil seeping out from around the base of the head tells me that there isn't a head gasket problem.

Engines that have been sitting for a long time will tend to smoke. Nothing weird about that. If it doesn't come back, there isn't a problem.
And if there isn't a problem, then there is no reason throwing money at it.
:2tup: :plus1: :plus1:


All times are GMT -4. The time now is 03:04 PM.
Page 5 of 5 « First 34 5
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.