GZ 250 Forums - Valve Adjustment

Page 2 of 2

Show 40 post(s) from this thread on one page

GZ 250 Forums (http://www.gz250bike.com/forum/index.php)

- Troubleshooting (http://www.gz250bike.com/forum/forumdisplay.php?f=19)

- - Valve Adjustment (http://www.gz250bike.com/forum/showthread.php?t=6348)

JohnC

09-06-2013 09:37 AM

Re: Valve Adjustment

Spray some Kroil - PB Blaster - Rust Buster - Liquid Wrench, etc. around the edge of the plug and tap the plug lightly with a hammer. If the washer fits the slot tightly it's probably your best bet. Use pliers to get more leverage. Tapping the washer while you try to turn it may also help. Repeat all steps as necessary.

OldNTired

09-06-2013 11:24 PM

Re: Valve Adjustment

Quote:

Originally Posted by WJTED1

Thanks to everyone! I finally got it! One last question..my crankshaft cap will not come off...any suggestions? I have used a quarter, a washer..and a piece of heavy gauge metal? Still stuck? Thanks!

The best tool I've ever found for this is a US Silver Eagle. It fits perfectly. Put a piece of cloth
over it, and turn it using a pair of pliers.

All times are GMT -4. The time now is 04:11 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page