GZ 250 Forums
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

GZ 250 Forums (http://www.gz250bike.com/forum/index.php)
-   GZ250 Media (http://www.gz250bike.com/forum/forumdisplay.php?f=14)
-   -   2005 Gz250 (http://www.gz250bike.com/forum/showthread.php?t=3077)

blaine 04-14-2010 11:19 AM
Re: 2005 Gz250
 
Ok, sorry,didn't look close enough.

blaine 04-14-2010 05:17 PM
Re: 2005 Gz250
 
Im with 'ALANTF' should be fixed under warranty.If gouged deeply fender should be replaced as any filler put in a plastic fender will 'show thru in a short time.

mole2 04-18-2010 10:22 PM
Re: 2005 Gz250
 
Quote:
Originally Posted by kraznos
I like the chrome door edging....looks good. By the background it looks like the Babylon area?


:)

kraznos 04-19-2010 05:45 AM
Re: 2005 Gz250
 
[q

dannylightning 04-19-2010 12:08 PM
Re: 2005 Gz250
 
Quote:
Originally Posted by music man
Quote:
Originally Posted by Mercutio57
Nice. I wanted to go without the rear seat as well, but when I removed it I found a nasty blemish in the fender underneath. Bummer.

How bad is the blemish, because if it is not super deep, you can use this stuff on it http://www.meguiarsdirect.com/detail/MEG+G17216


I used it on the gas tank of the bike I have now, it had swirl marks on it so bad that it looked like someone polished it with 1000 grit sandpaper or something, and now it is almost completely slick looking again. :2tup:
what is the technique to using that stuff, i have heard you have to be extremely carefull with buffing and rubbing compounds so you don't end up taking off the paint. i have some light swirl marks on my tank i would love to get rid of.

bonehead 04-19-2010 01:20 PM
Re: 2005 Gz250
 
Danny, I have seen a specific swirl remover wax at an auto parts. Old timers set in, can't think of where but it is out there just keep an eye out.

mole2 04-20-2010 02:01 AM
Re: 2005 Gz250
 
Quote:
Originally Posted by kraznos
Quote:
Originally Posted by mole2
Quote:
Originally Posted by kraznos
Did you used to live on Long Island?
For 58 years I did. I worked for LILCo, Keyspan and National Grid. Retired in 2007 and moved to SC in 2009.


:)

GZBrian 04-20-2010 05:12 AM
Re: 2005 Gz250
 
Can you tell me where you get the chrome edge trimming on the faenders and tank??? Not sure if it comes that way from Suzuki or you got it somewhere else. It really makes the fenders stand out from the rest of the bike. I have a black one and would like to see if I could get the same chrome trim you have. Nice picture of your motorcylce, looks great.. Thank you. GZ Brian

kraznos 04-20-2010 05:54 AM
Re: 2005 Gz250
 
G

kraznos 04-20-2010 06:02 AM
Re: 2005 Gz250
 
M


All times are GMT -4. The time now is 07:39 AM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.