PDA

View Full Version : whats needed to switch to led turn signals

anruari
11-15-2017, 01:36 PM
okay i wanna swap out those big old ugly indicators for some smaller tidier led ones..

is there anything else i need to change in order to do this apart from the indicators themselves?

thanks..
Water Warrior 2
11-15-2017, 04:00 PM
That should be fairly straight forward. You will need an "electronic flasher." Check the bike's flasher and see if it is a 2 or 3 prong unit. Your local auto parts store will have one just waiting for you.
blaine
11-15-2017, 05:01 PM
That should be fairly straight forward. You will need an "electronic flasher." Check the bike's flasher and see if it is a 2 or 3 prong unit. Your local auto parts store will have one just waiting for you.
If I remember correctly the flasher unit & side stand relay are togerher in the same unit......Just disconnect the two flasher wires & hook to electronic flasher.....(Down on fuse box)
Water Warrior 2
11-16-2017, 05:20 AM
If I remember correctly the flasher unit & side stand relay are togerher in the same unit......Just disconnect the two flasher wires & hook to electronic flasher.....(Down on fuse box)


Thanks Blaine. :tup:
anruari
11-25-2017, 10:08 PM
That should be fairly straight forward. You will need an "electronic flasher." Check the bike's flasher and see if it is a 2 or 3 prong unit. Your local auto parts store will have one just waiting for you.

okay erm where in the bike would i locate the flasher and then what do i do to hook and electronic one up?

think noob..
blaine
11-25-2017, 11:14 PM
okay erm where in the bike would i locate the flasher and then what do i do to hook and electronic one up?

think noob..
I replied above......Its down on the fuse box & you need to determine which two wires run the flasher & remove them from the box & hook to a electronic flasher.
anruari
11-27-2017, 09:44 AM
I replied above......Its down on the fuse box & you need to determine which two wires run the flasher & remove them from the box & hook to a electronic flasher.

okay so the two wires that come from the flashers. and i assume to change the brake light to led you d need to add that wire also to the electronic flasher?
blaine
11-27-2017, 04:26 PM
okay so the two wires that come from the flashers. and i assume to change the brake light to led you d need to add that wire also to the electronic flasher?
Nope fore brake light/tail light just change to a LED bulb..(1157)