PDA

View Full Version : Exhaust valve noise. How much is OK?


zippy
10-23-2015, 05:01 PM
Just did my valves. Intake was right on spec so no changes made but the exhaust were so tight I could not even get a .002 in. Adjusted them to .004. and they are now loud. I am the second owner of this bike. When I bought it, it had 9k on it and nothing had been touched (brakes were toast bty) I had never heard any noise from the valves at all. After the adjustment the valves were quite noisy to me as compared to before. Is this normal?

I seem to recall I once rode a suzuki tu250 and it had distinctive valve chatter.

Another note. Before the valve adjustment the bike had a hard time starting and staying idle. After the adjustment the bike starts right up even without the choke.

Water Warrior 2
10-23-2015, 06:10 PM
Some valve clatter is to be expected. If the bike runs better you must have done it right. Ride on.