Tool Box Battery Tray Relocation....Enjoy

[kori]

Remove tray bracket.
Trim what's needed.
Place here.
------------------------------------------------
------------------------------------------------
http://i502.photobucket.com/albums/e425/koriwright250/toolbox_zpsf646a737.jpg,
http://i502.photobucket.com/albums/e425/koriwright250/TOP_zps4133d743.jpg,
Put a bolt through this eye.
http://i502.photobucket.com/albums/e425/koriwright250/MADE_zpsdc04dfb8.jpg
------------------------------------------------
------------------------------------------------
Next, re-run wiring harness.
Get creative.
------------------------------------------------
------------------------------------------------
http://i502.photobucket.com/albums/e425/koriwright250/TOP2_zps62022b7f.jpg,
http://i502.photobucket.com/albums/e425/koriwright250/POSITIVE_zpscdf5a2a3.jpg,
------------------------------------------------
------------------------------------------------
End result.
Run ground along the bottom.
Almost meant to be.
------------------------------------------------
------------------------------------------------
http://i502.photobucket.com/albums/e425/koriwright250/G2G_zps32ab0c96.jpg

Took me about an hour or so. Not to complicated. Seat still fits with no problems. All the tabs for the side cover have been cut off.

[grasshopper]

you did a good job. now are you gonna do anything with the extra space?

[Water Warrior 2]

Cautionary note. Be sure to mount the rectifier in a position so it will receive air flow to cool.

[kori]

the rectifier is mounted on the front side. i just have it showing in the picture. the extra space is really just open space. i really want to cafe style or bob style this bike.

[Water Warrior 2]

the rectifier is mounted on the front side. i just have it showing in the picture. the extra space is really just open space. i really want to cafe style or bob style this bike.

Excellent.