View Full Version : Wirering diagram GZ 250 2003
haraldduus
11-16-2013, 01:29 PM
Hi all
http://i42.tinypic.com/2i1owao.jpg
Here is ad danish diagrame, that I have promised you :cool:
Writing is in danish, but you are all smart people, so I gues that you can "read"
the digrame!? If not pm me :)
alantf
11-17-2013, 04:16 AM
Thank you. Much easier to follow the colours and well defined joint points, than the black & white that we've been using up to now. :2tup:
haraldduus
11-18-2013, 03:28 PM
Yes absolutly. I also had one for my Chinese Jinlun JL 150 and it was so easy to work with. I dont understand why manufactors dont provide better ones for there produkts..... Well, yes of curse it is a question of money, but then again, if you could choose betwin service and good service.......!?! I would natrauly get the best of the too. :roll: Enjoy :2tup:
jonathan180iq
11-19-2013, 09:28 AM
Very well done, Haraldduus
Water Warrior 2
11-19-2013, 08:55 PM
+1
haraldduus
08-02-2015, 04:16 AM
A new diagram
alantf
08-02-2015, 05:19 AM
Seems to be some confusion here. The two diagrams you've posted are entirely different, and neither seems to be for the GZ. The first shows a fuel guage and other instruments that the GZ doesn't have, and doesn't show the safety interlocks. The second diagram is (again) missing the interlocks, and there are several other differences to the original diagram in the manual. Are you sure that either one is for the GZ? :hmm:
haraldduus
08-02-2015, 07:21 AM
Seems to be some confusion here. The two diagrams you've posted are entirely different, and neither seems to be for the GZ. The first shows a fuel guage and other instruments that the GZ doesn't have, and doesn't show the safety interlocks. The second diagram is (again) missing the interlocks, and there are several other differences to the original diagram in the manual. Are you sure that either one is for the GZ? :hmm:
You are rigt about the first diagram. It is for a Jinlun JL150. The otter is made for the GZ250 from the original in Black and white, so it must be corect. Would you pleace e-mail me a copy of the one you got, so I can compair them and se what is missing on the one I got.
alantf
08-02-2015, 01:35 PM
I've just checked my drawing, and it seems (apart from one or two differences) to be for the same bike. My apologies. Seems that the foreign names for the components got me confused. :doh:
img099.jpg (http://www.gz250bike.com/forum/attachment.php?attachmentid=499&stc=1&d=1438533316)
haraldduus
08-02-2015, 01:41 PM
It is ok, but pleace point out the difference, Perhaps it is the break that I nead to resolve my perdicament.
haraldduus mobil
vBulletin® v3.8.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.