PDA

View Full Version : exhaust pipes question

iMoon1221
08-09-2013, 10:13 PM
this is how the pipes were when i got the bike. (got it through a trade)
are they supposed to look like this? are these stock?
http://s13.postimg.org/6qy9mketv/20130809_173319.jpg (http://postimg.org/image/6qy9mketv/)
blaine
08-09-2013, 11:13 PM
this is how the pipes were when i got the bike. (got it through a trade)
are they supposed to look like this? are these stock?
http://s13.postimg.org/6qy9mketv/20130809_173319.jpg (http://postimg.org/image/6qy9mketv/)



Yep & Yep. ;) :)
iMoon1221
08-09-2013, 11:53 PM
i was just worried that they didnt look to flush. thank you for putting my mind at ease
steelpix
08-10-2013, 10:12 AM
Mine too
Goose51683
08-15-2013, 01:32 PM
I will caution you both though. they can still be cocked like that. When you reinstall them (if you take them off) make sure you are tightening both sides of the flange equally. tighten one side a turn or two, do the other side a turn or two, etc. If you tighten one side all the way down before the other side you can get things misaligned. Just a word of warning.