2007 GZ250 Part Out

[MrBosket]

(Make inquiries to: fanaticalknack@yahoo.com )

http://s2.postimage.org/bck5rjtw/DSC_0550.jpg (http://postimage.org/image/bck5rjtw/)

http://s3.postimage.org/1ieqwyoec/DSC_0292.jpg (http://postimage.org/image/1ieqwyoec/)

http://s3.postimage.org/1ieski0w4/DSC_0282.jpg (http://postimage.org/image/1ieski0w4/)

http://s3.postimage.org/1ieu81ddw/DSC_0283.jpg (http://postimage.org/image/1ieu81ddw/)

http://s3.postimage.org/1iexj42dg/DSC_0284.jpg (http://postimage.org/image/1iexj42dg/)

http://s3.postimage.org/1if0u6rd0/DSC_0285.jpg (http://postimage.org/image/1if0u6rd0/)

http://s3.postimage.org/1if5sssuc/DSC_0286.jpg (http://postimage.org/image/1if5sssuc/)

http://s3.postimage.org/1if7gc5c4/DSC_0287.jpg (http://postimage.org/image/1if7gc5c4/)

http://s3.postimage.org/1if93vhtw/DSC_0288.jpg (http://postimage.org/image/1if93vhtw/)

http://s3.postimage.org/1ifareubo/DSC_0289.jpg (http://postimage.org/image/1ifareubo/)

(MORE PICTURES BELOW)

It's that time of the year, and I unfortunately have to part out my GZ250 :( Never in an accident, and let down twice (not in motion). Expected cosmetic scratches here and there. The only remaining issue is that she has a micro fracturing in her cylinder head, and that's when I drew the line. That was the last part I needed to replace in order for my bike to stretch its legs again -- it's sad that she had to go out this way... ;(

Enough beating around the bush, lets talk parts!
(EVERYTHING EXCEPT CYLINDER HEAD, EXHAUST, AND FRONT FENDER IS IN GOOD WORKING CONDITION AND FOR SALE)

I'm basically saying, hey guys, nice bike, need parts?

Front Brake Master cylinder
Front Forks
Front Brake disc
Starter Relay
Frame
And that's just the tip of the iceberg!!!

If you have anything you need to replace, I might have it.

****EVERYTHING IS NEGOTIABLE, AND IN MOST CASES, 20%-50% OFF OF Cheapcycleparts.com LISTINGS****

HERE ARE THE PHOTOS!! (Specific photos available upon request)

ENTIRE ENGINE IS IN AWESOME CONDITION AND FOR SALE (except the cylinder head of course :tongue: )

Crankcase (right side pictured here)
http://s4.postimage.org/1w6m9p6qs/DSC_0213.jpg (http://postimage.org/image/1w6m9p6qs/)

(NEW) Piston
http://s4.postimage.org/1w836wajo/DSC_0214.jpg (http://postimage.org/image/1w836wajo/)

Cylinder (bored to fit new piston)
http://s4.postimage.org/1w8d44dic/DSC_0215.jpg (http://postimage.org/image/1w8d44dic/)

(NEW) Valve Rocker Arm Intake Shaft [12861-38200]
http://s4.postimage.org/1wd1sxrvo/DSC_0217.jpg (http://postimage.org/image/1wd1sxrvo/)

Crankshaft and left side crankcase
http://s4.postimage.org/1wd3gh4dg/DSC_0216.jpg (http://postimage.org/image/1wd3gh4dg/)

(NEW) 2 valve springs [12921-38211], (NEW) Valve Rocker Arm Ex [12850-13F00]
http://s4.postimage.org/1wdx85d9g/DSC_0218.jpg (http://postimage.org/image/1wdx85d9g/)

(NEW) Cam shaft [12711-13F00]
http://s3.postimage.org/de5woc78/DSC_0219.jpg (http://postimage.org/image/de5woc78/)

(NEW) Clutch Cover Gasket [11482-38312]
http://s3.postimage.org/det27744/DSC_0221.jpg (http://postimage.org/image/det27744/)

(NEW) Cylinder Head Gasket [11141-25D11]
http://s3.postimage.org/dhimwo90/DSC_0222.jpg (http://postimage.org/image/dhimwo90/)

(NEW) Cam chain tensioner [12811-38200]
http://s3.postimage.org/dhz6a56s/DSC_0223.jpg (http://postimage.org/image/dhz6a56s/)

(NEW) Magneto Cover Gasket [11483-37D00]
http://s3.postimage.org/dl8lfs90/DSC_0224.jpg (http://postimage.org/image/dl8lfs90/)

(NEW) Clutch Drive Plate [21442-37401] & (NEW) EBC Clutch plate set
http://s4.postimage.org/1wxod8llw/DSC_0225.jpg (http://postimage.org/image/1wxod8llw/)

http://s4.postimage.org/1wxwmxc2s/DSC_0227.jpg (http://postimage.org/image/1wxwmxc2s/)

(NEW) Cam Shaft Drive Chain [12760-13F00]
http://s4.postimage.org/1wyx0qyxw/DSC_0226.jpg (http://postimage.org/image/1wyx0qyxw/)

Beautiful Transmission
http://s4.postimage.org/1wzdk4fvo/DSC_0229.jpg (http://postimage.org/image/1wzdk4fvo/)

AND ALOT MORE PARTS!!!!

Rear tire is pretty new, less than 2000 miles on it.

Every oil change, and repair has been recorded in detail in log.

What ever you need, let me know!!!

Make all inquiries on here or to my email, which I check once or twice daily:

fanaticalknack@yahoo.com

-Thanks guys!
http://s2.postimage.org/bck5rjtw/DSC_0550.jpg (http://postimage.org/image/bck5rjtw/)

[grego]

i am looking for front reflectors

grego

[MrBosket]

i am looking for front reflectors

grego
$5 for both.
Do you need the front bracket and nuts?

[grego]

i;ll take them...sent you a pm with info let me know if you didn't get it....am not sure i did it correctly

thanks

safe biking


grego

[grego]

anybody heard from mr.bosket lately ?

[MrBosket]

anybody heard from mr.bosket lately ?

Hey Grego sorry for the delay, get back to you shortly!

[Suncross]

How much for the chain and...

This part in the picture. As you can see, mine is pretty scuffed up. I am not sure what that is. A cap of some sort, but the previous owner really didn't take care of this bike that well. I think chrome polish will help me with other parts of the engine, but no that.

[MrBosket]

How much for the chain and...

This part in the picture. As you can see, mine is pretty scuffed up. I am not sure what that is. A cap of some sort, but the previous owner really didn't take care of this bike that well. I think chrome polish will help me with other parts of the engine, but no that.

Hi Suncross, I'm pretty sure you're circling the Starting Motor. You can't buy this system separately --well, at least you shouldn't (I wouldn't recommend it). Perhaps its time to service your bike, and I would look at your starter. If it needs to be replaced, I have one for sale.

I'll sell you the starter for $350.

[Suncross]

How much for the chain and...

This part in the picture. As you can see, mine is pretty scuffed up. I am not sure what that is. A cap of some sort, but the previous owner really didn't take care of this bike that well. I think chrome polish will help me with other parts of the engine, but no that.

Hi Suncross, I'm pretty sure you're circling the Starting Motor. You can't buy this system separately --well, at least you shouldn't (I wouldn't recommend it). Perhaps its time to service your bike, and I would look at your starter. If it needs to be replaced, I have one for sale.

I'll sell you the starter for $350.

So you won't sell the cosmetic parts?

[blaine]

$350 for a used starter? :shocked: O_o :??: :??:

[techdude2013]

How much for the headlight lens?

[MrBosket]

$350 for a used starter? :shocked: O_o :??: :??:

My apologies, I posted the exact price of a new starter.

My offer on the starter is set at $120.

[MrBosket]

How much for the chain and...

This part in the picture. As you can see, mine is pretty scuffed up. I am not sure what that is. A cap of some sort, but the previous owner really didn't take care of this bike that well. I think chrome polish will help me with other parts of the engine, but no that.

Hi Suncross, I'm pretty sure you're circling the Starting Motor. You can't buy this system separately --well, at least you shouldn't (I wouldn't recommend it). Perhaps its time to service your bike, and I would look at your starter. If it needs to be replaced, I have one for sale.

I'll sell you the starter for $350.

So you won't sell the cosmetic parts?

Hi Suncross, I can't sell the "cosmetic parts" to the starter motor. Look online at any OEM parts finder for the part (or in the Parts Manual pdf for download, available on this website) and the diagram clearly shows the piece your looking for as a part of a whole, and not a separate piece. You could do some in depth research to find the specific piece you need, but I don't think you'll have any luck.
Even the starter rebuild kit for the 31100-38300-H17 starter motor doesnt have that specific part. A new starter costs $350.

I'll offer the entire starter to you for $120+shipping.

[Solwgn]

Still have the cylinder head, piston and jug?

[dspdr]

I need the left handlebar control with the choke lever and cable attached. How much??
I am in vegas. And how would I go about paying you??

[Rookie Rider]

i need the choke and choke cable if still available, im in N.Y.

[ucvro1]

I need a beer.

How much?

:popcorn:

[alantf]

I need a beer.

How much?

:popcorn:

If you want it "used" you'll need to send me a leakproof container. :crackup

[rkgz250]

Do you have turn signals or turn signal brackets?

[Meme]

Do you have the fuel cock assembly from the gas tank? How much to Reno, NV?

[ucvro1]

I am looking for the headlight switch. I need the inner guts of the headlight rocker and I believe they will fit my VS800 headlight switch. Do you know and do you still have that part?

Thank you...

[NAVI51]

PM sent

[Pamela]

I'm looking for the clamps and nuts and bolts that hold the handlebar