What a part is called

[BassMaster1]

Can someone tell me what the spring that
allows my back brake pedal to disengage is
called so I can order one. I'm sure it's just not
a brake spring. Thanks

[5th_bike]

It's called "spring", part number 09448-31034

It's number 8 on the figure at:
http://www.mrcycles.com/fiche_section_d ... fveh=10117 (http://www.mrcycles.com/fiche_section_detail.asp?section=432085&category=Motorcycles&make=SUZUKI&year=2003&fveh=10117)

[BassMaster1]

Thanks! This forum is great. Just bought
a 2000 model and got it running. Put new brakes
and painted it and I'm ready to roll. Any
known problems with these bikes? This bike
runs good, great mpg and it's very comfortable.

[5th_bike]

You're welcome, and - welcome to the forum, as well :2tup:

Problems? Nope. It loves to ride. Take care of its basic needs, ride it at least once a month, and it will serve you well for many years to come.

[BassMaster1]

Great, thanks again.

[blaine]

Any
known problems with these bikes?
Just put some carb cleaner in a tank of fuel once in a while,and some "Sta-bil" when it is going to be stored for any length of time.The carb is the weak link of the G.Z.
:) :roll:

[hacc81]

Just put some carb cleaner in a tank of fuel once in a while
Hey Blaine, any particular brand of card cleaner that has worked for you in the past? :??:
Also, Where did you buy it? Canadian Tire perhaps?
Thanks,

[alantf]

Just put some carb cleaner in a tank of fuel once in a while,The carb is the weak link of the G.Z.


:plus1:

[bonehead]

Just put some carb cleaner in a tank of fuel once in a while
Hey Blaine, any particular brand of card cleaner that has worked for you in the past? :??:
Also, Where did you buy it? Canadian Tire perhaps?
Thanks,
Most on here either use Seafoam or Berrymans Carb cleaner liquid. I prefer Berrymans, usually cheaper.

[blaine]

Hey Blaine, any particular brand of card cleaner that has worked for you in the past? :??:
Also, Where did you buy it? Canadian Tire perhaps?
Thanks,
I always had good luck with "SEA FOAM".Canadian Tire just recently started to sell it.
:cool: :)

[hacc81]

Ok, thanks guys... I'll give it a try in Canadian Tire then

[alanmcorcoran]

On thing to note - Although I've had some minor carb balkiness every time I've let the bike sit for more than a week or two, I was always able to cure it simply by riding it except for one time - where it seemed to be caused by something other than lack of use (at the time I suspected a botched oil change - done by me - I'm aware that doesn't exactly make sense.)

I tried Seafoam that time with no luck (the dealer eventually fixed the problem) but since then, I've not replaced the Seafoam and I haven't had to use it either. I'm not saying you don't need to use it, or it isn't a good preventative, just that the bike has been running fine for a year or so, without any Seafoam. I don't put a lot of miles on it anymore as I'm often out of town and I use the bigger bike for anything that requires highway speeds, but I've probably put another 1K on it 13 to 20 miles at a time. I guess what I'm saying is that if you don't have a lot of cash, you might not need the Seafoam as long as you ride the bike regularly.

[5th_bike]

I have had the bike for more than three years now and never put any carb cleaner in. The longest period of no use however was six weeks. Normally it gets used every two three weeks at least. As long as you regularly ride it, there shouldn't be any carburetor problems.

I figure if I would store it for more than a month I would run it dry or put a fuel stabilizer in.

[blaine]

I figure if I would store it for more than a month I would run it dry or put a fuel stabilizer in.
When storing your bike always fill the tank & add stabilizer to prevent your tank from rusting on the inside.
:) :cool:

[jonathan180iq]

If you ride very consistently, carb cleaner won't even be necessary. The amount of cleaning additives in modern gas take care of that. But I'm talking ride at least twice per week (like, use it as an actual vehicle) :)

Also, make sure you install an inline fuel filter.
$4 and 10 minutes.