PDA

View Full Version : 2009 TU250X Valve Clearance Spec

ToeCutter66
06-01-2010, 10:47 AM
Intake: 0.03 - 0.08 mm (0.001 - 0.003 in)
Exhaust: 0.08 - 0.13 mm (0.003 - 0.005 in)
Clearances measured on a cold engine

Adjusting screw locknut torque: 11.0 ft-lb
blaine
06-01-2010, 11:18 AM
Intake: 0.03 - 0.08 mm (0.001 - 0.003 in)
Exhaust: 0.08 - 0.13 mm (0.003 - 0.005 in)
Clearances measured on a cold engine

Adjusting screw locknut torque: 11.0 ft-lb

Same specs as G.Z.