View Full Version : New Controls
Jruffy
10-22-2008, 02:38 AM
Hello everyone, I was looking for some new foot controls and hand controls for my '06 GZ250. I was not able to find anything online and was hopeing that you could tell me somewere to get them. If not if you could tell me if any are interchangeable. Im very new to motorcycle machanics and appoligize for the semi dumb question.
patrick_777
10-22-2008, 06:31 AM
Are you wanting replacements or aftermarket upgrades?
If you're looking for replacements, I definitely would suggest checking out http://www.bikebandit.com and use their OEM parts search. They have a very good reputation for shipping and price.
You can also pick up OEM parts from http://www.cheapcycleparts.com They have slightly lower prices, but I can't personally vouch for their shipping charges or speed.
As for aftermarket parts upgrades, I wouldn't hold my breath. Unless you're capable of fabricating the mounting hardware yourself, you're probably out of luck.
Changing hand grips shouldnt be a problem. Any cycle shop will have 7/8" aftermarket grips or Ebay.
Its been so long, i dont even remember what the GZ foot pegs look like>
Jruffy
10-22-2008, 02:24 PM
Im just wanting to put some looks into the bike, I'm thinking of going to the Army and while I'm stationed here I would like to have semi cool transportation. Minor fabrication is possible, I think Im going to check out the MODS forum for a bit. I just think that 70 mpg and coolness should mix. I did the loud pipe but I drilled 4 1/2" holes in the stock muffler. (Thanks Dupo) Patrick I will look into these web site, I just wanted to say thank you for posting.
Well any 7/8" hand grips will work. Someone needs to post in here and help me out (since i dont own a gz anymore) on which grip you need (single or dual cable end) and if you need a throttle sleeve or not (check out the links patrick posted and look at the schematics to tell you what you need when getting an aftermarket grip set). I changed mine once, but i forget what all was involved. Its a 10 minute job.
As for the pegs .... again, i dont own a gz any more .... just match it up to an aftermarket. Its either going to be a male or female end. Direct bolt on.
Hope that helps.
Jruffy
10-22-2008, 11:38 PM
I was going to put something in this spot but I dont remember, I kinda want to open up the carb so I can get rid of that restrictive intake, if you wanna toss me a bone here. Side note Ill have some threads around Feb. about an exhaust =D
Easy Rider
10-23-2008, 12:07 PM
I kinda want to open up the carb so I can get rid of that restrictive intake, if you wanna toss me a bone here.
There are threads on here about intake modification too. My advice: Forget it. If you really think you need more HP, then save up and buy a bigger bike. Even with exhaust, intake and carb changes, the difference is barely noticeable.
If you want to see the result of reducing the intake restriction, just remove the air cleaner element and (try to) go for a short ride......away from other traffic. It runs like crap.
PS Where is WP MO ??
Easy is right, you wont see much difference. You just cant squeeze much more out of a 250cc bike.
Jruffy
10-23-2008, 03:19 PM
I tried that pulling the air cleaner, I was on my way to springfield and oh my god did I look stooopid doing a whole putting 2mph. West Plains, MO is on the boarder of MO and ARK. Its somewhat centered. I guess I'll just keep the performance the same.
Easy Rider
10-23-2008, 03:55 PM
West Plains, MO is on the boarder of MO and ARK.
For the benefit of others not familiar with the towns in Mo., you might want to change that in your profile! :)
Jruffy
10-23-2008, 10:55 PM
Will do, lol its a nutty town noone needs to know about it.
Easy Rider
10-24-2008, 10:34 AM
Will do, lol its a nutty town noone needs to know about it.
Oh, I see. An Arkansas wanna-be! :oops: :biggrin:
Jruffy
10-24-2008, 10:38 AM
Its just, a town with no potential or oppertunity...... Thats why I am not there at the moment.
music man
10-24-2008, 11:59 AM
Alright Easy now You have went to far, Are you trying to insult my fine State of Arkansas and all its glory :lol: . Arkansas is a beautiful place but it is not the best place to come to to make money for sure.
Easy Rider
10-24-2008, 02:21 PM
Alright Easy now You have went to far, Are you trying to insult my fine State of Arkansas and all its glory :lol: .
No....maybe. :roll:
Just sayin' that it's hard to tell the difference between S. Missouri and N. Arkansas.
Don't know which one should be offended by that !! :biggrin:
music man
10-24-2008, 02:59 PM
Well I used to live in north Arkansas(Eureka Springs) to be exact, and there is not much difference between (at least that part) of north Arkansas and S. Missouri.
And trust me, you can't offend me talking about this black hole of a State that I live in. :rawk:
Jruffy
10-25-2008, 03:06 AM
I don't know all Im saying is that were I am now, it is easier to get a job. It could be different for you, in your town. Sorry for the flame, it was an accedent.
Johnny.
vBulletin® v3.8.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.